SAP E_S4HCON2023 Dumps - The Sure Way To Pass Exam [Q14-Q33]

SAP E_S4HCON2023 Dumps – The Sure Way To Pass Exam [Q14-Q33]

January 12, 2024 latestexam 0 Comments

Rate this post

SAP E_S4HCON2023 Dumps – The Sure Way To Pass Exam

E_S4HCON2023 Exam Questions (Updated 2024) 100% Real Question Answers

NO.14 You are executing a standard SUM procedure to update an SAP system using main configuration mode
“Standard”. When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:

Before the downtime starts

At the end of the downtime

As part of the cleanup process

Early in the downtime

NO.15 What do you need to know about the SAP ERP Upgrade and Update Guide?
There are 2 correct answers to this question.
Response:

It contains a troubleshooting section

It is target release specific

It contains a section “free space requirements”

It is a database-specific document

NO.16 Which of the following SUM activities require a stack XML file calculated by the maintenance planner? Note: There are 3 correct answers to this question.

SAP S/4HANA conversion including DMO

Prerequisite check

DMO without system update

SAP S/4HANA conversion without DMO

Benchmark tool

NO.17 What can you achieve by setting the SUM parameter “migration_only” to 1 in parameter file SAPup_add.par?
Please choose the correct answer.
Response:

An upgrade of the software components is performed, without changing the database type.

A change of the database type is performed, without changing the software components.

An SAP S/4HANA conversion is performed, without adapting the customer data.

A migration of the SAP system to a new hardware is performed, without performing an SAP S/4HANA conversion.

NO.18 You are starting an SAP S/4HANA Conversion. The scenario strategy Downtime Optimized Conversion (DoC) is NOT selectable.What could be the reason?

The SAP S/4HANA Conversion is without DMO.

The SAP S/4HANA Conversion includes a DMO.

The start release is too old for DOC.

The source database is not supported

NO.19 When using the DMO of SUM, which files can be handled by SUM in the download directory?
There are 2 correct answers to this question.
Response:

Parameter file SAPup_add.par

Stack XML file calculated by the Maintenance Planner

Breakpoint configuration file SAPUPPHAS.BRK

MIGRATE J5T_DUR_XML file from a previous run

NO.20 You are executing a standard SUM procedure to update an SAP system using main configuration mode “Standard”. When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:

Before the downtime starts

At the end of the downtime

As part of the cleanup process

Early in the downtime

NO.21 Which maintenance events are possible with SUM for an SAP system based on AS ABAP 7.40 and above? There are 3 correct answers to this question.

Dual Stack split

Support Package Stack update

Database migration

Release upgrade

Homogenous system copy

NO.22 You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime.
The server provides 8 CPU cores. Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center you can see 40 Process Buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
Please choose the correct answer.
Response:

There is a maximum of 40 parallel R31oad processes within this specific downtime phase.

SUM is still running in uptime; the number of 40 defined R31oad processes is considered.

The number of CPU cores does not allow more than 40 R31oad processes to be run in parallel.

These are 40 pairs of R3load processes, so there are 80 R3load processes running.

NO.23 Which of the following are valid options to check the progress of an inplace SUM DMO run? Note There are 2 correct answers to this question

Check the dump size of the database export on disk.

Check the Charts Control Center in the SUM Ul

Check logs for jobs starting with RSUPG_SGEN in the SAP system.

Check the log files written in the SUM directory subdirectory abap. subdirectory log

NO.24 The SUM procedure stops with an error during uptime. How can you identify the current phase, the one in which SUM encountered an error?
There are 2 correct answers to this question.
Response:

Check the most recent entries shown in file sapevt.trc

Check the system log (transaction SM21) of the SAP system

Check the messages shown by the SUM UI

Check the most recent entries in SAPup.log

NO.25 You want to execute a Unicode Conversion only. Which approach do you need to follow?
Please choose the correct answer.
Response:

SWPM using the Backup / Restore procedure

SUM with DMO

SUM without DMO

SWPM using the Load procedure

NO.26 During the configuration of the DMO for SUM, which Migration Parameter selection is NOT possible for an inplace migration?

DMO with system move

Migration repetition option

Table count verification

Table contents compare

NO.27 ICNV initialization does 3

Creation of views

Creation of flag

Build index on flag column

NO.28 You performed a custom code check for an SAP S/4HANA conversion. In which transactions can you review the results?
There are 2 correct answers to this question.
Response:

SYCM (Simplification Database Content)

SAT (Runtime Analysis)

ATC (ABAP Test Cockpit)

SE80 (Object Navigator)

NO.29 You are planning to upgrade your SAP ECC 6.07 system running on a single codepage (SCP) to SAP ECC 6.08. What is the recommended option to perform this upgrade?
Please choose the correct answer.
Response:

Perform the upgrade to SAP ECC 6.08 before the Unicode conversion.

Combine the upgrade and the Unicode conversion using the Twin Upgrade &Unicode Conversion (TU &UC) procedure.

Perform the Unicode conversion before the upgrade to SAP ECC 6.08.

Combine the upgrade and the Unicode conversion using the Combined Upgrade &Unicode Conversion (CU &UC) procedure.

NO.30 Which step can be optimized when you provide the MIGRATE_DT_DUR.XML file to SUM?

Shadow on target creation

Downtime conversion

Silent data migration (SDM)

Downtime migration

NO.31 During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:

In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp

In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log

In the job log for the corresponding job in SM37 (Job Overview)

In the corresponding R3trans log files of this phase

NO.32 Which additional configuration options are offered by SUM when selecting “Switch expert mode on” in main configuration option “Standard”?
There are 2 correct answers to this question.
Response:

Keep archiving on during the whole procedure.

Use the Near Zero Downtime Maintenance Technology (NZDM).

Reuse a profile for the shadow instance from a previous run.

Choose the instance number of the shadow instance.

NO.33 Unicode migration ECC on MaxDB to HANA in scale out what should we consider.

Target DB size will increase temporarily

DMO can only be run with systems NW740 or NW731

Loading …

Pass SAP E_S4HCON2023 Exam Quickly With LatestCram: https://www.latestcram.com/E_S4HCON2023-exam-cram-questions.html

Related Certifications

C-HCMOD-01 (1)
C_S4CMA_2302 (1)
C-S43-2022 (1)
C-ARP2P-2308 (1)
C_SECAUTH_20 (1)
C-S4CPS-2208 (1)
C-HCADM-02 (1)
C-TSCM62-67 (1)
C_S4CMA_2208 (1)
C_TS413_2020 (1)

Free Cram & Latest Exams Dumps

SAP E_S4HCON2023 Dumps – The Sure Way To Pass Exam [Q14-Q33]

leave a comment Cancel reply

Related Certifications

Recent Posts

Archives

Categories