You are currently here!
  • Home
  • Cisco 300-730 Latest 300-730 exam dumps with real Cisco questions and answers [Q107-Q126]

Latest 300-730 exam dumps with real Cisco questions and answers [Q107-Q126]

October 2, 2026 latestexam 0 Comments
Rate this post

Latest 300-730 exam dumps with real Cisco questions and answers

300-730 Exam in First Attempt Guaranteed

Cisco 300-730 Exam Syllabus Topics:

Section Weight Objectives
Topic 1: Troubleshooting and Maintenance 5% – VPN connectivity issues

  • 1. Logging and monitoring tools
  • 2. Debug and diagnostic commands

– Performance and security optimization

  • 1. Throughput and latency tuning
  • 2. Security policy updates and compliance
Topic 2: Implementing IPsec and FlexVPN 25% – IPsec configuration on Cisco routers and firewalls

  • 1. Security policy and transform sets
  • 2. IKEv1 and IKEv2 configuration
  • 3. Tunnel and transport mode setup

– FlexVPN implementation

  • 1. Profile and template configuration
  • 2. High availability and scalability
  • 3. Dynamic tunnel establishment
Topic 3: Implementing DMVPN 20% – DMVPN configuration and monitoring

  • 1. Integration with IPsec
  • 2. Phase 1, 2, 3 deployment
  • 3. Troubleshooting DMVPN connectivity

– DMVPN architecture and components

  • 1. Hub and spoke roles
  • 2. NHRP and multicast support
Topic 4: Implementing Remote Access VPN 30% – AnyConnect Secure Mobility Client

  • 1. Profile management and posture assessment
  • 2. Deployment and configuration

– Clientless SSL VPN

  • 1. Portal customization
  • 2. Resource access control

– Secure mobility and access policies

  • 1. Split tunneling and traffic filtering
  • 2. Authentication and authorization methods
Topic 5: Secure Communications Architecture 20% – VPN technologies and standards

  • 1. Cryptography for VPNs
  • 2. SSL/TLS protocols
  • 3. IPsec protocols and modes

– VPN deployment models

  • 1. Remote access VPN
  • 2. Dynamic and hub-and-spoke architectures
  • 3. Site-to-site VPN

 

NO.107 Refer to the exhibit. A network security administrator receives this error message after configuring a site-to-site IPsec VPN between two sites What is the solution to this problem?

 
 
 
 

NO.108 Refer to the exhibit. A Cisco ASA is configured as a client to a router running as a FlexVPN server. The router is configured with a virtual template to terminate FlexVPN clients. Traffic between networks 192.168.0.0/24 and 172.16.20.0/24 does not work as expected. Based on the show crypto ikev2 sa output collected from the Cisco ASA in the exhibit, what is the solution to this issue?

 
 
 
 

NO.109 Refer to the exhibit.

A customer cannot establish an IKEv2 site-to-site VPN tunnel between two Cisco ASA devices. Based on the syslog message, which action brings up the VPN tunnel?

 
 
 
 

NO.110 Refer to the exhibit. Which two conclusions should be drawn from the DMVPN phase 2 configuration? (Choose two.)

 
 
 
 
 

NO.111 Refer to the exhibit. Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA.
Which command on the ASA is missing?

 
 
 
 

NO.112 Which method dynamically installs the network routes for remote tunnel endpoints?

 
 
 
 

NO.113 An engineer has successfully established a Phase 1 and Phase 2 tunnel between two sites. Site A has internal subnet 192.168.0.0/24 and Site B has internal subnet 10.0.0.0/24. The engineer notices that no packets are decrypted at Site B. Pings to 192.168.0.1 from internal Site B devices make it to the Site B router, and the Site A router has incrementing encrypt and decrypt counters.
What must be done to ensure bidirectional communication between both sites?

 
 
 
 

NO.114 A router is being configured for IKEv2 AnyConnect using AnyConnect-EAP. How would the administrator separate profiles for administrators and employees so that authorization differs when they connect?

 
 
 
 

NO.115 Refer to the exhibit. Which two conclusions should be drawn from the DMVPN phase 2 configuration? (Choose two.)

 
 
 
 
 

NO.116 A user is trying to log in to a Cisco ASA using the clientless SSLVPN feature and receives the error message “clientless (browser) SSLVPN access is not allowed”. Which step should the Cisco ASA administrator take to resolve this issue?

 
 
 
 

NO.117 What are two purposes of the key server in Cisco IOS GETVPN? (Choose two.)

 
 
 
 
 

NO.118 An administrator is deciding which authentication protocol should be implemented for their upcoming Cisco AnyConnect deployment. A list of the security requirements from upper management are: the ability to force AnyConnect users to use complex passwords such as C1$c0451035084!, warn users a few days before their password expires, and allow users to change their password during a remote access session. Which authentication protocol must be used to meet these requirements?

 
 
 
 

NO.119 Refer to the exhibit. A user is connecting from behind a PC with a private IP Address. Their ISP provider is blocking TCP port 443. Which AnyConnect XML configuration will allow the user to establish a connection with the ASA?

 
 
 
 

NO.120 A network administrator wants the Cisco ASA to automatically start downloading the Cisco AnyConnect client without prompting the user to select between WebVPN or AnyConnect. Which command accomplishes this task?

 
 
 
 

NO.121 Refer to the exhibit. Which type of VPN implementation is displayed?

 
 
 
 

NO.122 What are two functions of ECDH and ECDSA? (Choose two.)

 
 
 
 
 

NO.123 Which technology works with IPsec stateful failover?

 
 
 
 

NO.124 Which remote access VPN technology requires the use of the IPsec-proposal configuration option?

 
 
 
 

NO.125 An administrator is deciding which authentication protocol should be implemented for their upcoming Cisco AnyConnect deployment. A list of the security requirements from upper management are: the ability to force AnyConnect users to use complex passwords such as C1$c0451035084!, warn users a few days before their password expires, and allow users to change their password during a remote access session. Which authentication protocol must be used to meet these requirements?

 
 
 
 

NO.126 Refer to the exhibit. Upon setting up a tunnel between two sites, users are complaining that connections to applications over the VPN are not working consistently. The output of show crypto ipsec sa was collected on one of the VPN devices. Based on this output, what should be done to fix this issue?

 
 
 
 

Exam Sure Pass Cisco Certification with 300-730 exam questions: https://www.latestcram.com/300-730-exam-cram-questions.html

Related Links: www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw

leave a comment

Enter the text from the image below