[Q24-Q46] Pass Your NSE7_PBC-7.2 Exam Easily With 100% Exam Passing Guarantee [2025]

April 3, 2025 latestexam 0 Comments

4/5 - (1 vote)

Pass Your NSE7_PBC-7.2 Exam Easily With 100% Exam Passing Guarantee [2025]

NSE7_PBC-7.2 Dumps are Available for Instant Access from LatestCram

Fortinet NSE7_PBC-7.2 is an exam offered by Fortinet for individuals aiming to validate their skills and knowledge in public cloud security. NSE7_PBC-7.2 exam is designed to test the candidate’s ability to configure, maintain, and troubleshoot Fortinet’s public cloud security solutions.

QUESTION 24
Which two Amazon Web Services (AWS) features support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)

An Internet gateway with an EIP

A transit VPC

A NAT gateway with an EIP

A transit gateway with an attachment

QUESTION 25
What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?

Up to 1.25 Gbps per attachment

Up to 50 Gbps per attachment

Up to 10 Gbps per attachment

Up to 1 Gbps per attachment

QUESTION 26
Your company deploys FortiGate VM devices in high availability (HA) (active-active) mode with Microsoft Azure load balancers using the Microsoft Azure ARM template. Your senior administrator instructs you to connect to one of the FortiGate devices and configure the necessary firewall rules. However, you are not sure now to obtain the correct public IP address of the deployed FortiGate VM and identify the access ports.
How do you obtain the public IP address of the FortiGate VM and identify the correct ports to access the device?

In the configured load balancer, access the inbound NAT rules section.

In the configured load balancer, access the backend pools section.

In the configured load balancer, access the inbound and outbound NAT rules section.

In the configured load balancer, access the health probes section.

QUESTION 27
Refer to the exhibit

In your Amazon Web Services (AWS), you must allow inbound HTTPS access to the Customer VPC FortiGate VM from the internet However, your HTTPS connection to the FortiGate VM in the Customer VPC is not successful.
Also, you must ensure that the Customer VPC FortiGate VM sends all the outbound Internet traffic through the Security VPC How do you correct this Issue with minimal configuration changes?
(Choose three.)

Add a route With your local internet public IP address as the
destination and target transit gateway

Add route destination 0 0.0 0/0 to target the transit gateway

Add a route With your local internet public IP address as the destination and target internet gateway

Deploy an internet gateway, associate an EIP in the private subnet, edit route tables, and add a new route destination 0.0.0.0/0 to the target internet gateway

Deploy an internet gateway, associate an EIP in the public subnet, and attach the internet gateway to the Customer VPC,

B . Add route destination 0.0.0.0/0 to target the transit gateway. This will ensure that the Customer VPC FortiGate VM sends all the outbound internet traffic through the Security VPC, where it can be inspected by the Security VPC FortiGate VMs1. The transit gateway is a network device that connects multiple VPCs and on-premises networks in a hub-and-spoke model2. D. Deploy an internet gateway, associate an EIP in the private subnet, edit route tables, and add a new route destination 0.0.0.0/0 to the target internet gateway. This will allow inbound HTTPS access to the Customer VPC FortiGate VM from the internet, by creating a public route for the private subnet where the FortiGate VM is located3. An internet gateway is a service that enables communication between your VPC and the internet4. An EIP is a public IPv4 address that you can allocate to your AWS account and associate with your resources. E. Deploy an internet gateway, associate an EIP in the public subnet, and attach the internet gateway to the Customer VPC. This will also allow inbound HTTPS access to the Customer VPC FortiGate VM from the internet, by creating a public route for the public subnet where the FortiGate VM is located3. This is an alternative solution to option D, depending on which subnet you want to use for the FortiGate VM.
The other options are incorrect because:
Adding a route with your local internet public IP address as the destination and target transit gateway will not allow inbound HTTPS access to the Customer VPC FortiGate VM from the internet, because it will only apply to traffic coming from your specific IP address, not from any other source on the internet1. Moreover, it will not ensure that the outbound internet traffic goes through the Security VPC, because it will only apply to traffic going to your specific IP address, not to any other destination on the internet1.
Adding a route with your local internet public IP address as the destination and target internet gateway will not allow inbound HTTPS access to the Customer VPC FortiGate VM from the internet, because it will bypass the Security VPC and send the traffic directly to the Customer VPC1. Moreover, it will not ensure that the outbound internet traffic goes through the Security VPC, because it will only apply to traffic going to your specific IP address, not to any other destination on the internet1.

QUESTION 28
You are adding a new spoke to the existing transit VPC environment using the AWS Cloud Formation template. Which two components must you use for this deployment? (Choose two.)

The OSPF AS value used for the hub.

The Amazon CloudWatch tag value.

The BGPASN value used for the transit VPC.

The tag value of the spoke

QUESTION 29
You need a solution to safeguard public cloud-hosted web applications from the OWASP Top 10 vulnerabilities. The solution must support the same region in which your applications reside, with minimum traffic cost Which solution meets the requirements?

Use FortiADC

Use FortiCNP

Use FortiWebCloud

Use FortiGate

QUESTION 30
Refer to the exhibit

You are deploying two FortiGate VMS in HA active-passive mode with load balancers in Microsoft Azure Which two statements are true in this load balancing scenario? (Choose two.)

The FortiGate public IP is the next-hop for all the traffic.

An internal load balancer listener is the next-hop for outgoing traffic.

You must add a route to the Microsoft VIP used for the health check.

A dedicated management interface can be used for load balancing.

QUESTION 31
Refer to the exhibit

You are tasked with deploying a webserver and FortiGate VMS in AWS_ You are using Terraform to automate the process Which two important details should you know about the Terraform files? (Choose two.)

All the output values are available after a successful terraform apply command

The subnet_private 1 value is defined in the variables . tf file

After the deployment, Terraform output values are visible only through AWS CloudShell.

You must specify all the AWS credentials in the output. of file.

QUESTION 32
Your administrator instructed you to deploy an Azure vWAN solution to create a connection between the main company site and branch sites to the other company VNETs.
What are the two best connection solutions available between your company headquarters, branch sites, and the Azure vWAN hub? (Choose two.)

ExpressRoute

GRE tunnels

SSL VPN connections

An L2TP connection

VPN Gateway

QUESTION 33
Which statement about Transit Gateway (TGW) in Amazon Web Services (AWS) is true?

TGW can have multiple TGW route tables.

Both the TGW attachment and propagation must be in the same TGW route table

A TGW attachment can be associated with multiple TGW route tables.

The TGW default route table cannot be disabled.

QUESTION 34
Which statement about FortiSandbox in Amazon Web Services (AWS) is true?

FortiSandbox in AWS uses Windows virtual machines (VMs) to inspect files.

In AWS, virtual machines (VMs) that inspect files do not have to be reset after inspecting a file.

FortiSandbox in AWS can have a maximum of eight virtual machines (VMs) that inspect files.

In AWS, virtual machines (VMs) that inspect files are constantly up and running.

QUESTION 35
Refer to the exhibit.

You have deployed a Linux EC2 instance in Amazon Web Services (AWS) with the settings shown on the exhibit What next step must the administrator take to access this instance from the internet?

Configure the user name and password.

Enable source and destination checks on the instance

Enable SSH and allocate it to the device

Allocate an Elastic IP address and assign it to the instance.

QUESTION 36
Which three properties are configurable Microsoft Azure network security group rule settings?
(Choose three.)

Action

Sequence number

Source and destination IP ranges

Destination port ranges

Source port ranges

QUESTION 37
Refer to the exhibit. Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.

If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)

SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT- 0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01

172.29.32.71 is set as a next hop IP for all routes under FortigateUDR-01

The network interface of the active unit moves to itself

SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01

QUESTION 38
Refer to the exhibit. In your Amazon Web Services (AWS) virtual private cloud (VPC), you must allow outbound access to the internet and upgrade software on an EC2 instance, without using a NAT instance. This specific EC2 instance is running in a private subnet: 10.0.1.0/24. Also, you must ensure that the EC2 instance source IP address is not exposed to the public internet. There are two subnets in this VPC in the same availability zone, named public (10.0.0.0/24) and private (10.0.1.0/24).

How do you achieve this outcome with minimum configuration?

Deploy a NAT gateway with an EIP in the private subnet, edit the public main routing table, and change the destination route 0.0.0.0/0 to the target NAT gateway.

Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Public-route, and delete the route destination 10.0.0.0/16 to target local.

Deploy a NAT gateway with an EIP in the private subnet, edit route tables, select Private- route, and add a new route destination 0.0.0.0/0 to the target internet gateway.

Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Private-route and add a new route destination 0.0.0.0/0 to target the NAT gateway.

QUESTION 39
Refer to the exhibit

You deployed an HA active-passive FortiGate VM in Microsoft Azure.
Which two statements regarding this particular deployment are true? (Choose two.)

During the failover, the passive FortiGate issues API calls to Azure

Use the vdom-excepticn command to synchronize the configuration.

There is no SLA for API calls from Microsoft Azure.

By default, the configuration does not synchromze between the primary and secondary devices.

QUESTION 40
How does the immutable infrastructure strategy work in automation?

It runs a single live environment for configuration changes.

It runs one idle and a single live environment for configuration changes.

It runs two live environments for configuration changes.

It runs one idle and two live environments for configuration changes.

QUESTION 41
You are asked to find a solution to replace the existing VPC peering topology to have a higher bandwidth connection from Amazon Web Services (AWS) to the on-premises data center Which two solutions will satisfy the requirement? (Choose two.)

Use ECMP and VPN to achieve higher bandwidth.

Use transit VPC to build multiple VPC connections to the on-premises data center

Use a transit VPC with hub and spoke topology to create multiple VPN connections to the on-premises data center.

Use the transit gateway attachment With VPN option to create multiple VPN connections to the on-premises data center

Explanation
The correct answer is C and D. Use a transit VPC with hub and spoke topology to create multiple VPN connections to the on-premises data center. Use the transit gateway attachment with VPN option to create multiple VPN connections to the on-premises data center.
According to the Fortinet documentation for Public Cloud Security, a transit VPC is a VPC that serves as a global network transit center for connecting multiple VPCs, remote networks, and virtual private networks (VPNs). A transit VPC can use a hub and spoke topology to create multiple VPN connections to the on-premises data center, using the FortiGate VM as a virtual appliance that provides network security and threat prevention.A transit VPC can also leverage Equal-Cost Multi-Path (ECMP) routing to achieve higher bandwidth and load balancing across multiple VPN tunnels1.
A transit gateway is a network transit hub that connects VPCs and on-premises networks. A transit gateway attachment is a resource that connects a VPC or VPN to a transit gateway. You can use the transit gateway attachment with VPN option to create multiple VPN connections to the on-premises data center, using the FortiGate VM as a virtual appliance that provides network security and threat prevention.A transit gateway attachment with VPN option can also leverage ECMP routing to achieve higher bandwidth and load balancing across multiple VPN tunnels2.
The other options are incorrect because:
Using ECMP and VPN to achieve higher bandwidth is not a complete solution, as it does not specify how to replace the existing VPC peering topology or how to connect the AWS VPCs to the on-premises data center.
Using transit VPC to build multiple VPC connections to the on-premises data center is not a correct solution, as it does not specify how to use a hub and spoke topology or how to leverage ECMP routing for higher bandwidth.
1:Fortinet Documentation Library – Transit VPC on AWS2:Fortinet Documentation Library – Deploying FortiGate VMs on AWS

QUESTION 42
Refer to Exhibit:

You are troubleshooting a Microsoft Azure SDN connector issue on your FortiGate VM in Azure Which three settings should you check while troubleshooting this problem? (Choose three.)

Use the show vdom command to see hidden VDOMs.

use the diag sys va command.

Ensure FortiGate port4 can resolve DNS.

Ensure FortiGate portl has internet access

Ensure IP address 169.254.169_254 is not blocked

QUESTION 43
What are two main features in Amazon Web Services (AWS) network access control lists (ACLs)? (Choose two.)

You cannot use Network ACL and Security Group at the same time.

The default network ACL is configured to allow all traffic

NetworkACLs are stateless, and inbound and outbound rules are used for traffic filtering

Network ACLs are tied to an instance

QUESTION 44
When adding the Amazon Web Services (AWS) account to the FortiCNP, which three mandatory configuration steps must you follow? (Choose three.)

Add AWS accounts through FortiCNP.

Enable cloud protection through AWS Guard Duty and AWS Inspector

Accept FortiCNP to create CloudTrail for the account

Enable cross-reg Ion aggregation

Launch the CloudFormation template.

QUESTION 45
Which two Amazon Web Services (AWS) features support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)

A NAT gateway with an EIP

A transit gateway with an attachment

An Internet gateway with an EIP

A transit VPC

QUESTION 46
You are tasked with deploying a FortiGate HA solution in Amazon Web Services (AWS) using Terraform What are two steps you must take to complete this deployment? (Choose two.)

Enable automation on the AWS portal.

Create an AWS Identity and Access Management (IAM) user With permissions.

Use CloudSheIl to install Terraform.

Create an AWS Active Directory user with permissions.

Fortinet NSE7_PBC-7.2 exam is a 60-minute exam that consists of 30 multiple-choice questions. NSE7_PBC-7.2 exam covers a range of topics related to public cloud security, including cloud architecture, network security, application security, data security, and compliance. To pass NSE7_PBC-7.2 exam, you must score a minimum of 70%.

Study resources for the Valid NSE7_PBC-7.2 Braindumps: https://www.latestcram.com/NSE7_PBC-7.2-exam-cram-questions.html

Free Cram & Latest Exams Dumps

[Q24-Q46] Pass Your NSE7_PBC-7.2 Exam Easily With 100% Exam Passing Guarantee [2025]

leave a comment Cancel reply

Recent Posts

Archives

Categories