Authentic Fortinet FCP_FGT_AD-7.4 Exam Dumps PDF - 2025 Updated [Q34-Q51]

Authentic Fortinet FCP_FGT_AD-7.4 Exam Dumps PDF – 2025 Updated [Q34-Q51]

February 21, 2025 latestexam 0 Comments

Rate this post

Authentic Fortinet FCP_FGT_AD-7.4 Exam Dumps PDF – 2025 Updated

Get Prepared for Your FCP_FGT_AD-7.4 Exam With Actual 90 Questions

NO.34 Refer to the exhibit.

Based on the ZTNA tag, the security posture of the remote endpoint has changed.
What will happen to endpoint active ZTNA sessions?

They will be re-evaluated to match the endpoint policy.

They will be re-evaluated to match the firewall policy.

They will be re-evaluated to match the ZTNA policy.

They will be re-evaluated to match the security policy.

C: They will be re-evaluated to match the ZTNA policy.
Endpoint posture changes trigger active ZTNA proxy sessions to be re-verified and terminated if the endpoint is no longer compliant with the ZTNA policy.

NO.35 Refer to the exhibit to view the application control profile.

Users who use Apple FaceTime video conferences are unable to set up meetings.
In this scenario, which statement is true?

Apple FaceTime belongs to the custom monitored filter.

The category of Apple FaceTime is being monitored.

Apple FaceTime belongs to the custom blocked filter.

The category of Apple FaceTime is being blocked.

Apple FaceTime belongs to the custom blocked filter.
FaceTime categorized (filtered) under “Excessive-Bandwidth” and custom filter override set to block this.
Also we know that users can’t use FaceTime.
Apple FaceTime falls under (VoIP Catagory), (Excessive-Bandwidth Behavior) and (Vendor as Apple).
A. Correct, but that comes 2nd.
B. Correct, but that comes 2nd, as custom Filter Overrides the precedence of Category.
C. Correct, and that comes 1st.
D. Wrong, VoIP Category is monitored
So correct answer is (C).

NO.36 Refer to the exhibit.

FortiGate has two separate firewall policies for Sales and Engineering to access the same web server with the same security profiles.
Which action must the administrator perform to consolidate the two policies into one?

Enable Multiple Interface Policies to select port1 and port2 in the same firewall policy

Create an Interface Group that includes port1 and port2 to create a single firewall policy

Select port1 and port2 subnets in a single firewall policy.

Replace port1 and port2 with the any interface in a single firewall policy.

To consolidate the two separate firewall policies for Sales and Engineering departments accessing the same web server, you can create an Interface Group that includes both port1 (Sales) and port2 (Engineering). Once the Interface Group is created, you can use this group as a single incoming interface in a single firewall policy. This approach reduces the number of policies, making management more efficient.
Reference:
FortiOS 7.4.1 Administration Guide: Firewall Policy Configuration

NO.37 An administrator wants to configure Dead Peer Detection (DPD) on IPSEC VPN for detecting dead tunnels. The requirement is that FortiGate sends DPD probes only when no traffic is observed in the tunnel.
Which DPD mode on FortiGate will meet the above requirement?

Disabled

On Demand

Enabled

On Idle

The Dead Peer Detection (DPD) mode on FortiGate that will meet the requirement of sending DPD probes only when no traffic is observed in the tunnel is “On Idle.” Therefore, the correct answer is:
D. On Idle
Disabled:
DPD is turned off. No detection probes are sent.
On Demand:
DPD probes are sent when there is no traffic detected in the tunnel for a specified period.
Enabled:
DPD probes are sent periodically, regardless of whether there is traffic in the tunnel or not.
On Idle:
DPD probes are sent only when there is no traffic observed in the tunnel for a certain period. This mode is often preferred when you want to conserve bandwidth by sending DPD probes only when the tunnel is not actively transmitting data.
In the context of the administrator’s requirement to send DPD probes only when no traffic is observed in the tunnel, the appropriate choice is “On Idle.” This ensures that the DPD probes are triggered only during periods of inactivity, helping to detect and address potential issues in a more bandwidth-efficient manner.

NO.38 Which two statements describe how the RPF check is used? (Choose two.)

The RPF check is run on the first sent packet of any new session.

The RPF check is run on the first reply packet of any new session.

The RPF check is run on the first sent and reply packet of any new session.

The RPF check is a mechanism that protects FortiGateand the network from IP spoofingattacks.

NO.39 An administrator must enable a DHCP server on one of the directly connected networks on FortiGate.
However, the administrator is unable to complete the process on the GUI to enable the service on the interface.
In this scenario, what prevents the administrator from enabling DHCP service?

The role of the interface prevents setting a DHCP server.

The DHCP server setting is available only on the CLI.

Another interface is configured as the only DHCP server on FortiGate.

The FortiGate model does not support the DHCP server.

FortiGate interfaces can be configured in different roles, such as WAN or LAN. If an interface is set as a
“WAN” role, you cannot configure it to act as a DHCP server through the GUI. The interface role must be set to “LAN” or “Undefined” to allow DHCP server configuration.
References:
* FortiOS 7.4.1 Administration Guide: DHCP Server Configuration

NO.40 Which of the following are purposes of NAT traversal in IPsec? (Choose two.)

To detect intermediary NAT devices in the tunnel path.

To dynamically change phase 1 negotiation mode aggressive mode.

To encapsulation ESP packets in UDP packets using port 4500.

To force a new DH exchange with each phase 2 rekey

When NAT-T is enabled on both ends, peers can detect any NAT device along the path.
If NAT is found, then the following occurs:
– Both phase 2 and remaining phase 1 packets change to UDP port 4500.
– Both ends encapsulate ESP within UDP port 4500.
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD48755

NO.41 Refer to the exhibit, which shows an SD-WAN zone configuration on the FortiGate GUI.

Based on the exhibit, which statement is true?

The underlay zone contains port1 and

The d-wan zone contains no member.

The d-wan zone cannot be deleted.

The virtual-wan-link zone contains no member.

The “d-wan” zone in FortiGate SD-WAN configuration is the default SD-WAN zone created when SD-WAN is enabled. This zone contains all the interfaces assigned to SD-WAN and is essential for the functionality of the SD-WAN feature. The “d-wan” zone cannot be deleted because it is required for SD-WAN operations. Option A is incorrect because the underlay zone does not contain port1. Options B and D are incorrect because they incorrectly describe the configuration of zones.
Reference:
FortiOS 7.4.1 Administration Guide: SD-WAN Zone Configuration

NO.42 The HTTP inspection process in web filtering follows a specific order when multiple features are enabled in the web filter profile.
What order must FortiGate use when the web filter profile has features enabled, such as safe search?

DNS-based web filter and proxy-based web filter

Static URL filter, FortiGuard category filter, and advanced filters

Static domain filter, SSL inspection filter, and external connectors filters

FortiGuard category filter and rating filter

The correct order for the HTTP inspection process in web filtering, specifically when features like safe search are enabled in the web filter profile, is:
B. Static URL filter, FortiGuard category filter, and advanced filters
This means that the FortiGate device will first check against the Static URL filter, followed by the FortiGuard category filter, and then any additional advanced filters configured in the web filter profile.
This sequence allows for a systematic evaluation of the URL against different criteria, ensuring comprehensive web filtering.
The HTTP Inspection Order (Static URL Filter -> FortiGuard Category Filter -> Advanced Filters)

NO.43 Which statement is correct regarding the use of application control for inspecting web applications?

Application control can identify child and parent applications, and perform different actions on them

Application control signatures are included in Fortinet Antivirus engine

Application control does not display a replacement message for a blocked web application

Application control does not require SSL Inspection to Identity web applications

FortiGate’s application control can differentiate between parent and child applications and allows administrators to configure distinct actions for each. For example, it can identify Facebook (parent application) and specific functions within it (child applications) like Facebook video or chat, enabling more granular control over application traffic.

NO.44 Refer to the exhibit.

In the network shown in the exhibit, the web client cannot connect to the HTTP web server. The administrator runs the FortiGate built-in sniffer and gets the output shown in the exhibit.
What should the administrator do next, to troubleshoot the problem?

Execute a debug flow.

Capture the traffic using an external sniffer connected to part1.

Execute another sniffer on FortiGate, this time with the filter “hose 10.o.1.10”.

Run a sniffer on the web server.

The sniffer output shows that packets from the web client are reaching the FortiGate and being forwarded to the web server, but there is no indication that the web server is responding. To troubleshoot this issue, executing a debug flow will help analyze the traffic path and pinpoint where the problem might be occurring, such as a possible issue in firewall policy or route settings that is causing the server not to respond correctly.
References:
* FortiOS 7.4.1 Administration Guide: Troubleshooting network connectivity

NO.45 Refer to the exhibits.

The exhibits show a diagram of a FortiGate device connected to the network, as well as the IP pool configuration and firewall policy objects.
The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port3) interface has the IPaddress
10.0.1.254/24.
Which IP address will be used to source NAT (SNAT) the traffic, if the user on Local-Client (10.0.1.10) pings the IP address of Remote-FortiGate (10.200.3.1)?

10.200.1.1

10.200.1.149

10.200.1.99

10.200.1.49

The traffic from the user on Local-Client (10.0.1.10) pinging the IP address of Remote-FortiGate (10.200.3.1) will match the firewall policy with the service “PING traffic”. According to the firewall policy:
* Policy ID 6 is set for PING traffic and uses the NAT IP pool “SNAT-Remote1”, which is defined as
10.200.1.99.

NO.46 An administrator is configuring an Ipsec between site A and site B. The Remotes Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192.16.1.0/24 and the remote quick mode selector is 192.16.2.0/24.
How must the administrator configure the local quick mode selector for site B?

192.16.3.0/24

192.16.2.0/24

192.16.1.0/24

192.16.0.0/8

The local quick mode selector for site B should be configured to match the remote quick mode selector of site
A. In this case, the remote quick mode selector for site A is 192.16.2.0/24. Therefore, the correct answer is: B. 192.16.2.0/24 So, the administrator should configure the local quick mode selector for site B as 192.16.2.0/24 to ensure that the IPsec VPN configuration is consistent between the two sites.

NO.47 An administrator configures FortiGuard servers as DNS servers on FortiGate using default settings.
What is true about the DNS connection to a FortiGuard server?

It uses UDP 8888.

It uses DNS over HTTPS.

It uses DNS overTLS.

It uses UDP 53.

NO.48 Refer to the exhibit.

FortiGate has two separate firewall policies for Sales and Engineering to access the same web server with the same security profiles.
Which action must the administrator perform to consolidate the two policies into one?

Enable Multiple Interface Policies to select port1 and port2 in the same firewall policy

Create an Interface Group that includes port1 and port2 to create a single firewall policy

Select port1 and port2 subnets in a single firewall policy.

Replace port1 and port2 with the any interface in a single firewall policy.

To consolidate the two separate firewall policies for Sales and Engineering departments accessing the same web server, you can create an Interface Group that includes both port1 (Sales) and port2 (Engineering). Once the Interface Group is created, you can use this group as a single incoming interface in a single firewall policy. This approach reduces the number of policies, making management more efficient.
References:
* FortiOS 7.4.1 Administration Guide: Firewall Policy Configuration

NO.49 Refer to exhibit.
An administrator configured the web filtering profile shown in the exhibit to block access to all social networking sites except Twitter. However, when users try to access twitter.com, they are redirected to a FortiGuard web filtering block page.

Based on the exhibit, which configuration change can the administrator make to allow Twitter while blocking all other social networking sites?

On the FortiGuard Category Based Filter configuration, set Action to Warning for Social Networking.

On the Static URL Filter configuration, set Type to Simple.

On the Static URL Filter configuration, set Action to Exempt.

On the Static URL Filter configuration, set Action to Monitor.

C: On the Static URL Filter configuration, set Action to Exempt.
Based on the exhibit, the administrator has configured the FortiGuard Category Based Filter to block access to all social networking sites, and has also configured a Static URL Filter to block access to twitter.com. As a result, users are being redirected to a block page when they try to access twitter.com.
To allow users to access twitter.com while blocking all other social networking sites, the administrator can make the following configuration change:
On the Static URL Filter configuration, set Action to Exempt: By setting the Action to Exempt, the administrator can override the block on twitter.com that was specified in the FortiGuard Category Based Filter. This will allow users to access twitter.com, while all other social networking sites will still be blocked.
Note:
Tested this in a lab environment and to make this work as stated in the question the Exempt action is the only way to go, and also *.twimg.com will has to be added to the URL Filter with an Exempt action for this situation to really work!
Allow: Access is permitted. Traffic is passed to remaining operations, including FortiGuard web filter, web content filter, web script filters, and antivirus scanning.
Exempt: Allows traffic from trusted sources to bypass all security inspections.

NO.50 Refer to the exhibit to view the application control profile.

Based on the configuration, what will happen to Apple FaceTime?

Apple FaceTime will be allowed, based on the Apple filter configuration.

Apple FaceTime will be allowed, based on the Categories configuration.

Apple FaceTime will be blocked, based on the Excessive-Bandwidth filter configuration.

Apple FaceTime will be allowed only if the filter in Application and Filter Overrides is set to Learn.

Apple facetime will be blocked according to the “Excessive Bandwidth” filter.
Facetime belongs to VoIP category which is monitored here and therefore should be allowed, however, because of the behavior of the facetime “Excessive-Bandwidth”, the custom filter Excessive-Bandwidth will block Facetime and the lookup won’t continue to the second filter.
The excessive bandwidth filter contains facetime and is referenced by the application sensor with the action to block. There is no reference to a bandwidth threshold at which point the filter is applied so the number of calls is irrelevant.

NO.51 Refer to exhibit.
An administrator configured the web filtering profile shown in the exhibit to block access to all social networking sites except Twitter. However, when users try to access twitter.com, they are redirected to a FortiGuard web filtering block page.

Based on the exhibit, which configuration change can the administrator make to allow Twitter while blocking all other social networking sites?

On the FortiGuard Category Based Filter configuration, set Action to Warning for Social Networking.

On the Static URL Filter configuration, set Type to Simple.

On the Static URL Filter configuration, set Action to Exempt.

On the Static URL Filter configuration, set Action to Monitor.

Loading …

Accurate & Verified New FCP_FGT_AD-7.4 Answers As Experienced in the Actual Test!: https://www.latestcram.com/FCP_FGT_AD-7.4-exam-cram-questions.html

Related Certifications

ACP-Cloud1 (1)

Free Cram & Latest Exams Dumps

Authentic Fortinet FCP_FGT_AD-7.4 Exam Dumps PDF – 2025 Updated [Q34-Q51]

leave a comment Cancel reply

Related Certifications

Recent Posts

Archives

Categories