[Jul 17, 2024] Latest Questions MB-820 Guide to Prepare Free Practice Tests [Q22-Q43]

July 17, 2024 latestexam 0 Comments

4/5 - (1 vote)

[Jul 17, 2024] Latest Questions MB-820 Guide to Prepare Free Practice Tests

Reliable MB-820 Dumps Questions Available as Web-Based Practice Test Engine

NEW QUESTION 22
You create a query that contains a procedure to display the top customers.
The procedure breaks at runtime.

You need to fix the code.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

In summary, for the procedure to run correctly, the query must be opened after setting the filter and before attempting to read from it. The SetFilter method is correct for the intended operation, and there’s no requirement to use SetRange or to enclose the Message call in a BEGIN .. END block.

NEW QUESTION 23
A company plans to customize its per tenant extension reports. The company has the following requirements for the customization:
* Child data items must not be displayed on the request page for some master detail reports.
* Selecting key filter fields takes users too much time. The customization must decrease the amount of time to select the fields.
You need to optimize the report request page.
Which actions should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 24
A company plans to integrate tests with its build pipelines.
The company has two Docket sandbox environments: SandboxA and SandboxB.
You observe the following:
* SandboxA is configured without the Test Toolkit installed.
* SandboxB must be configured from scratch. The Test Toolkit must be installed in SandboxB during configuration.
You need to configure the sandbox environments.
How should you complete the cmdlets? To answer, select the appropriate options in the answer area.

NEW QUESTION 25
You are developing an XMLport to export data from the parent Item table and a related child “Item Unit of Measure’ table. The XMLport configuration must provide the following:
* Link the child table to its parent.
* Display a confirmation message after the XMLport runs.
You need to generate the XMLport.
What should you do? To answer, move the appropriate triggers to the correct requirements. You may use each trigger once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

NEW QUESTION 26
You need to configure telemetry for the SaaS tenant and test whether the ingested signals are displayed.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

1 – Create an Azure Application Insights instance by using the Azure Portal in the Customer’s subscription.
2 – Select the environment in the Admin Center and place the connection string in the Application Insights Connection String field.
3 – Select the Application Insights instance, select Logs and then inspect the Traces table.

NEW QUESTION 27
You create a codeunit that works with a table named Boxes. You plan to filter the records and then modify them.
You get an error that you do not have permission to work with the Boxes table.
You need to assign the Indirect permissions for the Boxes table to the codeunit.
Which four code blocks should you use in sequence to assign the correct permission? To answer, move the appropriate code blocks from the list of code blocks to the answer area and arrange them in the correct order.

1 – TableData
2 – “Boxes” =
3 – Permissions
4 – RIM

NEW QUESTION 28
A company plans to deploy Business Central.
The company has the following deployment requirements:
* Use the company hardware architecture to run the deployment.
* Use sandbox environments to develop extensions.
* Allow tenants to connect to Shopify with the standard connector.
* Use Microsoft Power Automate to create a workflow that calls a business event.
You need to identify the deployment type for each requirement.
Which deployment types should you use? To answer, move the appropriate deployment types to the correct requirements. You may use each deployment type once, more than once, or not at all.

NEW QUESTION 29
A company plans to set up a local Business Central Development Docker container. The environment will be used for testing new project ideas.
You need to ensure that the most recent Business Central artifact URL has been selected. Which command should you use?

Get-BcArtifactUrl -type sandbox -select Current

Get-BcArtifactUrl -type sandbox -select Closest

Get-BcArtifactUrl -type sandbox -select NextMinor

Get-BcArtifactUrl -type sandbox -select NextMajor

To ensure the most recent Business Central artifact URL is selected for setting up a local Business Central Development Docker container, the command to use is Get-BcArtifactUrl -type sandbox -select Current (A). This PowerShell command retrieves the URL for the latest available Business Central artifact for a sandbox environment, ensuring that the Docker container is set up with the most up-to-date version for testing new project ideas. The -select Current parameter is crucial as it specifies that the current, or latest, version of the artifact is to be retrieved, as opposed to selecting a version based on other criteria such as Closest, NextMinor, or NextMajor.

NEW QUESTION 30
You create the following Vendor table and Item table in Business Central.

You require the following data set to assign vendors to items.

You need to create a query to assign the vendors.

Which three code blocks should you use to develop the solution? To answer, move the appropriate code blocks from the list of code blocks to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.

1 – dataitem(Vendor; Vendor)
2 – dataitem(Item; Item)
3 – DataItemLink = “Vendor No.” = Item.Vendor_No;

NEW QUESTION 31
A company has a task that is performed infrequently. Users often need to look up the procedure to complete the task.
The company requires a wizard that leads users through a sequence of steps to complete the task.
You need to create the page to enable the wizard creation.
Which page type should you use?

NavigatePage

Card

RoleCenter

List

For a task that is performed infrequently and requires users to follow a sequence of steps, a wizard-like interface is ideal. In Microsoft Dynamics 365 Business Central, the NavigatePage page type (A) is best suited for this purpose. NavigatePage is designed to guide users through a series of steps or pages, allowing them to complete a task by making choices or entering data in a structured manner. This page type is often used for setup wizards, data migration tasks, or any other process that benefits from a step-by-step approach. Unlike the other page types like Card (B), RoleCenter (C), or List (D), NavigatePage specifically supports the navigation and decision-making flow required for wizard creation, making it the optimal choice for this requirement.

NEW QUESTION 32
You have a decimal variable named AmountlCY.
You need to round up the variable to four decimal places.
Which result value should you use?

Result: = Round (AmountLCY,A. ‘>”}:

Result: = Round {AmountLCY. 0.0001. =’);

Result: = Round (AmountLCY. 0.0001. ‘<‘):

Result: = Round (AmountLCY, 0.0001, >’);

To round up a decimal variable to four decimal places in Microsoft Dynamics 365 Business Central, you should use the Round function with specific parameters. The correct formula is Result := Round(AmountLCY, 0.0001, ‘=’) (B). This function rounds the AmountLCY variable to the nearest value based on the second parameter, which is 0.0001 in this case, representing four decimal places. The third parameter, ‘=’, specifies that the function should round to the nearest value, which effectively rounds up the value when it’s halfway between two possible rounded values. This approach ensures that the AmountLCY variable is accurately rounded to four decimal places, which is essential for financial calculations and reporting to maintain precision.

NEW QUESTION 33
A company is implementing Business Central.
In the per-tenant extension, TableA Header and TableA Line are document tables, and TableB Header and TableB Line are document history tables.
The company requires that the resulting dataset of query objects contain the following records:
* All records from TableA Header even if no matching record value exists in the linked TableA Line
* Records from TableB Header where a match is found in the linked TableB Line field You need to configure the linked data item to generate the required dataset.
Which SqlJoinType should you use? To answer, move the appropriate SqUoinTypes to the correct dataset requirements. You may use each SqlJoinType once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content.

NEW QUESTION 34
You need to define the data types for the fields of the N on-conformity table.
Which two data types should you use? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

Integer for the N on-conformity Number field

Date Time for the Non-Conformity Date field

Char for the Non-Conformity Number field

Date for the Non-Conformity Date field

Code for the Non-Conformity Number field

In Business Central, fields in tables are assigned specific data types that determine the kind of data they can store. For the Non-conformity table mentioned in the case study, the following data types should be used:
Date for the Non-Conformity Date field: This is because the Non-conformity Date field is required to store only the date when the non-conformity was recorded. The Date data type is appropriate for storing dates without times.
Code for the Non-Conformity Number field: The Non-conformity Number field is described to use alphanumeric values with a format that includes “NC” and the year, like “NC24-001”. In Business Central, the Code data type is used for fields that store alphanumeric keys. It is a text field with a limited length, which makes it suitable for number series that contain letters and numbers.
Other options are not suitable:
A) Integer for the Non-conformity Number field: This would not be appropriate because the Non-conformity Number includes alphanumeric characters and not just integers.
B) DateTime for the Non-Conformity Date field: This is not correct because there is no requirement to store the time alongside the date.
C) Char for the Non-Conformity Number field: Char data type is not typically used in Business Central for number series or identifiers. The Code data type is preferred for this purpose.

NEW QUESTION 35
You have the following XML file sample for the Items list:

You plan to create the next XML file by using an XMLport object.
You need to complete the code segment to export the file in the required format How should you complete the code segment? To answer, select the appropriate options in the answer area.

NEW QUESTION 36
You create a Business Central report.
You need to insert values on the Request page to be saved for the next time the report is run.
What should you do?

Set the SaveValues property to true.

Declare a Savevalues’ variable and assign it to true on the OnOpenPage () trigger.

Set the Transact! on Type property to Update.

Set the Use Request Page property to true.

To ensure that the values inserted on the Request page of a Business Central report are saved for the next time the report is run, the SaveValues property (D) should be set to true. This property is available on the Request page of the report and, when set to true, allows the system to remember the values entered by the user, so they do not have to re-enter them each time they run the report. This feature enhances user experience by reducing repetitive data entry and ensuring consistency in report parameters across multiple executions. The other options mentioned, such as setting the Transaction Type property to Update (A) or declaring a Savevalues variable in the OnOpenPage trigger (B), are not directly related to saving user input on a report’s Request page.

NEW QUESTION 37
You are writing a procedure to block all inventory items with numbers that do not start with the letter S.
You need to complete the procedure.
How should you complete the code expressions? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 38
You plan to write unit test functions to test newly developed functionality in an app.
You must create a test codeunit to write the functions.
You need to select the property to use for the test codeunit.
Which property should you use to ensure that the requirements are fulfilled?

SubType

Access

Description

When creating a test codeunit in Microsoft Dynamics 365 Business Central to write unit test functions, the SubType property (A) of the codeunit should be set to Test. This property is crucial for defining the codeunit’s purpose and behavior within the application. By setting the SubType property to Test, you are indicating that the codeunit contains test functions intended to validate the functionality of other parts of the application, such as customizations or new developments. This distinction ensures that the testing framework within Business Central recognizes the codeunit as a container for test functions, allowing it to execute these functions in a testing context, which can include setting up test data, running the tests, and cleaning up after the tests have completed.

NEW QUESTION 39
A company uses Business Central.
The company plans to use a translation file in an extension. The extension has a caption that should not be translated.
You need to prevent the caption from being translated.
What should you do?

Use the CaptionML property and copy the same caption for each language used.

Set the GenerateLockedTranslations feature in the appjson file.

Add the Locked = true parameter to the Caption.

Delete the Caption property.

Copy the same caption for each language in the translation file.

To prevent a caption from being translated in an extension for Microsoft Dynamics 365 Business Central, you should add the Locked = true parameter to the Caption (C). This parameter explicitly marks the caption as locked for translation, ensuring that it remains unchanged across different language versions of the extension. This approach is useful for specific terms, brand names, or other elements within the application that should remain consistent regardless of the user’s language settings. Unlike the other options, which involve manual manipulation of the translation file or properties, setting Locked = true directly in the AL code provides a clear, maintainable, and error-proof method to exclude specific captions from the translation process.

NEW QUESTION 40
You create a table with fields.
You observe errors in the code
You need to resolve the errors.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

NEW QUESTION 41
A company has a Business Central online environment.
You are exporting a file from a client by using the DownloadFromStream method.
You need to create an InStream data type to send the data
Which solution should you use?

Use OeatelnStream method from codeunit “Temp Blob”.

Use OeatelnStream method for BLOB field of “TempBlob” table.

Use CreatelnStream method for File type variable.

When exporting a file from a client using the DownloadFromStream method in a Business Central online environment, you need to create an InStream data type to send the data. The solution is to use the CreateInStream method from codeunit “Temp Blob” (A). The Temp Blob codeunit provides temporary storage of BLOBs (Binary Large Objects) and is commonly used for handling files and streams in Business Central. By using the CreateInStream method on a Temp Blob, you create an InStream that can then be used with the DownloadFromStream method to send the file data to the client. This approach is efficient for file handling and transfer in Business Central, especially in scenarios involving data export or file manipulation.

NEW QUESTION 42
You are developing an app.
You plan to publish the app to Microsoft AppSource.
You need to assign an object range for the app.
Which object range should you use?

custom object within the range 50000 to 59999

custom object within the range 50000 to 99999

divided by countries and use specific a country within the range 100000 to 999999

an object range within the range of 7000000 to 74999999 that is requested from Microsoft

free object within the standard range 1 to 49999

When developing an app for Microsoft AppSource, it is essential to use an object range that is specifically designated by Microsoft to avoid conflicts with other apps and the base application. The correct object range to use is:
An object range within the range of 70000000 to 74999999 that is requested from Microsoft (D): This range is reserved for AppSource apps. Developers need to request this range from Microsoft to ensure that the objects used in their extension do not conflict with those used by other extensions or by the base application. Using this reserved range helps maintain the integrity and compatibility of extensions published on AppSource.
It’s important to note that the other ranges mentioned (A, B, C, and E) are not suitable for apps intended for AppSource. Ranges 50000 to 59999 and 50000 to 99999 are typically reserved for per-tenant customizations or partner solutions, not for distribution on AppSource. The standard range 1 to 49999 is reserved for the base application objects, and using an object range divided by countries (C) is not a standard practice for AppSource apps.

NEW QUESTION 43
You plan to create a table to hold client data.
You have the following data integrity requirements:
* Lookups into other records must be established.
* Validate if a record exists in a destination record.
You need to select the table field property to use for each requirement.
Which table field property should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.