Latest JN0-636 Pass Guaranteed Exam Dumps Certification Sample Questions [Q69-Q93]

Latest JN0-636 Pass Guaranteed Exam Dumps Certification Sample Questions [Q69-Q93]

August 11, 2023 latestexam 0 Comments

5/5 - (1 vote)

Latest JN0-636 Pass Guaranteed Exam Dumps Certification Sample Questions

New JN0-636 Test Materials & Valid JN0-636 Test Engine

The JN0-636 Certification Exam is meant for security professionals who have a thorough understanding of Juniper Networks’ security features and solutions. JN0-636 exam covers a broad range of topics, including security policies, firewall filters, VPNs, intrusion prevention, and security management. The JN0-636 exam is an advanced-level certification exam that is aimed at professionals who have a minimum of three years of experience in the field.

Juniper JN0-636 certification exam is a professional-level exam that validates the skills and knowledge of security professionals in configuring and managing Juniper Networks security solutions. Security, Professional (JNCIP-SEC) certification is designed for network security engineers, administrators, and consultants who are responsible for managing and implementing Juniper Networks security solutions in enterprise environments. The JN0-636 certification exam tests candidates’ knowledge of security technologies, security policies, and best practices in network security, as well as their ability to troubleshoot and maintain Juniper Networks security solutions.

Q69. Referring to the exhibit, which two statements are true about the CAK status for the CAK named
“FFFP”? (Choose two.)

CAK is not used for encryption and decryption of the MACsec session.

SAK is successfully generated using this key.

CAK is used for encryption and decryption of the MACsec session.

SAK is not generated using this key.

Q70. Which configurable SRX Series device feature allows you to capture transit traffic?

syslog

traceoptions

packet-capture

archival

Q71. While troubleshooting security policies, you added the count action.
Where do you see the result of this action?

In the show security policies hit-count command output.

In the show security flow statistics command output.

In the show security policies detail command output.

In the show firewall log command output.

Q72. Which statement is true about persistent NAT types?

The target-host-port parameter cannot be used with IPv4 addresses in NAT46.

The target-host parameter cannot be used with IPv6 addressee in NAT64.

The target-host parameter cannot be used with IPv4 addresses inNAT46

The target-host-port parameter cannot be used with IPv6 addresses in NAT64

Q73. Exhibit

You are not able to ping the default gateway of 192.168 100 1 (or your network that is located on your SRX Series firewall.
Referring to the exhibit, which two commands would correct the configuration of your SRX Series device?
(Choose two.)
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q74. Which two additional configuration actions are necessary for the third-party feed shown in the exhibit to work properly? (Choose two.)

You must create a dynamic address entry with the IP filter category and the ipfilter_office365 value.

You must create a dynamic address entry with the C&C category and the cc_offic365 value.

You must apply the dynamic address entry in a security policy.

You must apply the dynamic address entry in a security intelligence policy.

Q75. Exhibit

Referring to the exhibit, an internal host is sending traffic to an Internet host using the 203.0.113.1 reflexive address with source port 54311.
Which statement is correct in this situation?

Only the Internet host that the internal host originally communicated with can initiate traffic to reach the internal host using the 203.0.113.1 address, source port 54311, and a random destination port.

Only the Internet host that the internal host originally communicated with can initiate traffic to reach the internal host using the 203.0 113.1 address, a random source port, and destination port 54311.

Any host on the Internet can initiate traffic to reach the internal host using the 203.0.113.1 address, source port 54311, and a random destination port.

Any host on the Internet can initiate traffic to reach the internal host using the 203.0.113.1 address, a random source port, and destination port54311.

Q76. You opened a support ticket with JTAC for your Juniper ATP appliance. JTAC asks you to set up access to the device using the reverse SSH connection.Which three setting must be configured to satisfy this request? (Choose three.)

Enable JTAC remote access

Create a temporary root account.

Enable a JATP support account.

Create a temporary admin account.

Enable remote support.

https://kb.juniper.net/InfoCenter/index?page=content&id=TN326&cat=&actp=LIST&showDraft=false

Q77. Referring to the exhibit, which three statements are true? (Choose three.)

The packet’s destination is to an interface on the SRX Series device.

The packet’s destination is to a server in the DMZ zone.

The packet originated within the Trust zone.

The packet is dropped before making an SSH connection.

The packet is allowed to make an SSH connection.

Q78. Referring to the exhibit. You configure a traceoptions file called radius on your returns the output shown in the exhibit. What is the source of the problem?

An incorrect password is being used.

The authentication order is misconfigured.

The RADIUS server IP address is unreachable.

The RADIUS server suffered a hardware failure.

Q79. Exhibit

The exhibit shows a snippet of a security flow trace.
In this scenario, which two statements are correct? (Choose two.)

This packet arrived on interface ge-0/0/4.0.

Destination NAT occurs.

The capture is a packet from the source address 172.20.101.10 destined to 10.0.1.129.

An existing session is found in the table.

Q80. Your IPsec VPN configuration uses two CoS forwarding classes to separate voice and data traffic. How many IKE security associations are required between the IPsec peers in this scenario?

Q81. You are asked to determine if the 203.0.113.5 IP address has been added to the third-party security feed, DS hield, from Juniper Seclnte1.
You have an SRX Series device that is using Seclnte1 feeds from Juniper ATP Cloud.
Which command will return this information?

show security dynamic–address category–name CC | match 203.0.113.5

show security dynamic–address category–name Infected–Hosts | match 203.0.113.5

show security dynamic-address category-name IP Filter I match 203.0.113.5

show Security dynamic-address category-name JWAS | match 203.0.113.5

Q82. Exhibit

Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q83. Exhibit

Which statement is true about the output shown in the exhibit?

The SRX Series device is configured with default security forwarding options.

The SRX Series device is configured with packet-based IPv6 forwarding options.

The SRX Series device is configured with flow-based IPv6 forwarding options.

The SRX Series device is configured to disable IPv6 packet forwarding.

Q84. Exhibit

You are trying to configure an IPsec tunnel between SRX Series devices in the corporate office and branch1.
You have committed the configuration shown in the exhibit, but the IPsec tunnel is not establishing.
In this scenario, what would solve this problem.

Add multipoint to the st0.0 interface configuration on the branch1 device.

Change the IKE proposal-set to compatible on the branch1 and corporate devices.

Change the local identity to inet advpn on the branch1 device.

Change the IKE mode to aggressive on the branch1 and corporate devices.

Q85. Which method does an SRX Series device in transparent mode use to learn about unknown devices in a network?

LLDP-MED

IGMP snooping

RSTP

packet flooding

Q86. Exhibit.

A hub member of an ADVPN is not functioning correctly.
Referring the exhibit, which action should you take to solve the problem?

[edit interfaces]
root@vSRX-1# delete st0.0 multipoint

[edit interfaces]
user@hub-1# delete ipsec vpn advpn-vpn traffic-selector

[edit security]
user@hub-1# set ike gateway advpn-gateway advpn suggester disable

[edit security]
user@hub-1# delete ike gateway advpn-gateway advpn partner

Q87. In Juniper ATP Cloud, what are two different actions available in a threat prevention policy to deal with an infected host? (Choose two.)

Send a custom message

Close the connection.

Drop the connection silently.

Quarantine the host.

Q88. Exhibit

You are using traceoptions to verity NAT session information on your SRX Series device Referring to the exhibit, which two statements are correct? (Choose two.)

This packet is part of an existing session.

The SRX device is changing the source address on this packet from

This is the first packet in the session

The SRX device is changing the destination address on this packet 10.0.1 1 to 172 20.101.10.

Q89. Click the Exhibit button.
user @host> show bgp summary logical-system LSYS1
Groups : 11 Peers : 10 Down peers: 1
Table Tot. Paths Act Paths Suppressed History Damp State
Pending
inet.0 141 129 0 0 0 Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn
State|#Active/Received/Accepted/Damped…
192.168.64.12 65008 11153 11459 0 26 3d
3:10:43 9/10/10/0 0/0/0/0
192.168.72.12 65009 11171 11457 0 26 3d
3:10:39 11/12/12/0 0/0/0/0
192.168.80.12 65010 9480 9729 0 27 3d
3:10:42 11/12/12/0 0/0/0/0
192.168.88.12 65011 11171 11457 0 25 3d
3:10:31 12/13/13/0 0/0/0/0
192.168.96.12 65012 9479 9729 0 26 3d
3:10:34 12/13/13/0 0/0/0/0
192.168.10.12 65013 111689 11460 0 27 3d
3:10:46 9/10/10/0 0/0/0/0
192.168.11.12 65014 111688 11458 0 25 3d
3:10:42 9/10/10/0 0/0/0/0
192.168.12.12 65015 111687 11457 0 25 3d
3:10:38 9/10/10/0 0/0/0/0
192.68.11.12 650168 9478 9729 0 25 3d
3:10:42 9/10/10/0 0/0/0/0
192.168.13.12 65017 111687 11457 0 27 3d
3:10:30 9/10/10/0 0/0/0/0
192.168.16.12 65017 111687 11457 0 27 1w3d2h
Connect
user@host> show interfaces ge-0/0/7.0 extensive
Logical interface ge-0/0/7.0 (Index 76) (SNMP ifIndex 548) (Generation
141)
…
Security: Zone: log
Allowed host-inbound traffic : bootp dns dhcp finger ftp tftp ident-
reset http https ike netconf
ping reverse-telnet reverse-ssh rloqin rpm rsh snmp
snmp-trap ssh telnet traceroute xnm-clear-text xnm-ssl lsping ntp sip
r2cp
Flow Statistics:
Flow Input statistics:
Self packets: 0
ICMP packets: 0
VPN packets: 0
Multicast packets: 0
Bytes permitted by policy: 0
Connections established: 0
Flow Output statistics:
Multicast packets: 0
Bytes permitted by policy: 0
Flow error statistics (Packets dropped due to):
Address spoofing: 0
Authentication failed: 0
Incoming NAT errors: 0
Invalid zone received packet: 0
Multiple user authentications: 0
Multiple incoming NAT: 0
No parent for a gate: 0
No one interested in self pakets: 0
No minor session: 0
No more sessions: 589723
No NAT gate: 0
No route present: 0
No SA for incoming SPI: 0
No tunnel found: 0
No session for a gate: 0
No zone or NULL zone binding 0
Policy denied: 0
Security association not active: 0
TCP sequence number out of window: 0
Syn-attack protection: 0
User authentication errors: 0
Protocol inet, MTU: 1500, Generation: 1685, Route table: 0
Flags: Sendbcast-pkt-to-re
Addresses, F1ags: Is-Preferred Is-Primary
Destination: 10.5.123/24, Local: 10.5.123.3, Broadcast:
10.5.123.255, Generation: 156
Protocol multiservice, MTU: Unlimited, Generation: 1686, Route table: 0 Policer: Input: __default_arp_policer__
…
An SRX Series device has been configured with a logical system LSYS1.
One of the BGP peers is down.
Referring to the exhibit, which statement explains this problem?

The LSYS license only allows up to ten BGP peerings.

The maximum number of allowed flows is set to low.

The allocated memory is not sufficient for this LSYS.

The minimum number of flows is set to high.

Q90. Referring to the exhibit, which three protocols will be allowed on the ge-0/0/5.0 interface?
(Choose three.)

IBGP

OSPF

IPsec

DHCP

NTP

Q91. An administrator wants to configure an SRX Series device to log binary security events for tenant systems.
Referring to the exhibit, which statement would complete the configuration?

Configure the tenant as TSYS1 for the pi security profile.

Configure the tenant as root for the pi security profile.

Configure the tenant as master for the pi security profile.

Configure the tenant as local for the pi security profile

Q92. What is a secure key management protocol used by IPsec?

ESP

TCP

IKE

Q93. Your manager asks you to show which attacks have been detected on your SRX Series device using the IPS feature.
Which command would you use to accomplish this task?

show security idp attack detail

show security idp attack table

show security idp memory

show security idp counters

Loading …

JN0-636 Sample with Accurate & Updated Questions: https://www.latestcram.com/JN0-636-exam-cram-questions.html

Free Cram & Latest Exams Dumps

Latest JN0-636 Pass Guaranteed Exam Dumps Certification Sample Questions [Q69-Q93]

leave a comment Cancel reply

Recent Posts

Archives

Categories