[Nov-2022] Use Real MS-203 Dumps Free Sample Questions and Practice Test Engine [Q128-Q146]

[Nov-2022] Use Real MS-203 Dumps Free Sample Questions and Practice Test Engine [Q128-Q146]

November 14, 2022 latestexam 0 Comments

Rate this post

[Nov-2022] Use Real MS-203 Dumps Free Sample Questions and Practice Test Engine

Pass Microsoft MS-203 exam – questions – convert Tets Engine to PDF

Management of public folders

Top Level Hierarchy as a public folder
Planning and configuration of a public folder
Migration of things in public folder mailboxes
Creation of extra public folder mailboxes

NEW QUESTION 128
You have a Microsoft 365 E5 tenant that contains the users shown in the following table.

You have a connector for a remote domain named contoso.com as shown in the following exhibit.

You have a transport rule as shown in the following exhibit.

User1 sends an email message to [email protected] that has a subject line containing the word Confidential.
User2 sends an email message to [email protected] that has a subject line of New report. The body of the message contains the word confidential.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Reference:
https://docs.microsoft.com/en-us/compliance/assurance/assurance-encryption-in-transit

NEW QUESTION 129
You have a Microsoft 365 environment that contains 1,000 mobile devices.
You need to recommend a solution to prevent all the mobile devices that use the Exchange ActiveSync protocol from authenticating by using Basic authentication.
Which two solutions should you recommend? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

Configure the CAS mailbox settings for each mailbox.

Implement Azure Multi-Factor Authentication (MFA).

Create an authentication policy.

Create a conditional access policy.

Create a device access rule.

Explanation/Reference:
https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/disable-basic- authentication-in-exchange-online
https://docs.microsoft.com/en-us/azure/active-directory/conditional-access/block-legacy-authentication

NEW QUESTION 130
You are evaluating the email hygiene configuration of a Microsoft Exchange Server 2019 organization.
You run the command shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/antispam-antimalware/set-contentfilterconfig?view=exchange-ps

NEW QUESTION 131
Your company has an Exchange Online tenant.
A partner company named Fourth Coffee also uses Exchange Online.
You need to ensure that the users at your company share free busy information with the users at Fourth Coffee. The solution must ensure that the meeting details included in the calendars of your company users remain hidden from the Fourth Coffee users.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/new-organizationrelationship?view=exchange-ps

NEW QUESTION 132
You have a Microsoft 365 environment that contains 1,000 mobile devices.
You need to recommend a solution to prevent all the mobile devices that use the Exchange ActiveSync protocol from authenticating by using Basic authentication.
Which two solutions should you recommend? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

Configure the CAS mailbox settings for each mailbox.

Implement Azure Multi-Factor Authentication (MFA).

Create an authentication policy.

Create a conditional access policy.

Create a device access rule.

Reference:
https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/disable-basicauthentication-in
https://docs.microsoft.com/en-us/azure/active-directory/conditional-access/block-legacy-authentication

NEW QUESTION 133
You have distribution group named Car Parking Distribution Group that is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Explanation

References:
https://docs.microsoft.com/en-us/powershell/module/exchange/users-and-groups/set-distributiongroup?view=exc

NEW QUESTION 134
You have a Microsoft Exchange Server 2019 hybrid deployment that contains the users shown in the following table.

You need to provide each user with an archive mailbox that is stored in Exchange Online.
Which admin center should you use to perform the configuration for each user? To answer, drag the appropriate admin centers to the correct users. Each admin center may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Explanation:
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/enable-archive-mailboxes
https://docs.microsoft.com/en-us/exchange/hybrid-deployment/create-cloud-based-archive

NEW QUESTION 135
Your company has a Microsoft Exchange Online tenant named contoso.com.
The company acquires a company named ADatum Corporation that uses a third-party IMAP email service named adatum.com.
You plan to migrate the mailbox content of adatum.com to contoso.com.
You need to connect Microsoft 365 to the IMAP email service.
What should you create first?

a new organization relationship

a new migration endpoint

a new remote domain

a new staged migration batch

Reference:
https://docs.microsoft.com/en-us/exchange/mailbox-migration/migrating-imap-mailboxes/migrating-imap-mailboxes

NEW QUESTION 136
You have a Microsoft 365 E5 subscription.
A user attempts to send an email message to an external recipient and receives the following error message:
“Your message couldn’t be delivered because you weren’t recognized as a valid sender. The most common reason for this is that your email address is suspected of sending spam and it’s no longer allowed to send messages outside of your organization. Contact your email admin for assistance. Remove Server returned ‘550
5.1.8 Access denied, bad outbound sender’.”
You need to ensure that the user can send email to external recipients.
What should you use?

Threat management in the Security & Compliance admin center.

Data loss prevention in the Security & Compliance admin center.

compliance management in the Exchange admin center

action center in the Exchange admin center

Explanation/Reference:
http://www.noelpulis.com/fix-550-5-1-8-access-denied-bad-outbound-sender/

NEW QUESTION 137
You have a hybrid deployment between a Microsoft Exchange Online tenant and an on-premises Exchange Server 2013 organization. The deployment contains the public folders shown in following table.

You need to configure the deployment to meet the following requirements:
Exchange Server 2013 mailboxes must be able to access PF2.
Exchange Online mailboxes must be able to access PF1.
Which PowerShell script should you run from an Exchange Server 2013 server to meet each requirement? To answer, drag the appropriate scripts to the correct requirements. Each script may be used once, more than once, or at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Reference:
https://docs.microsoft.com/en-us/exchange/hybrid-deployment/set-up-exo-hybrid-public-folders
https://docs.microsoft.com/en-us/exchange/hybrid-deployment/set-up-modern-hybrid-public-folders

NEW QUESTION 138
You have a Microsoft Exchange Server 2019 organization.
Users access their email by using Microsoft Outlook 2019.
The users report that when a mailbox is provisioned for a new user, there is a delay of many hours before the new user appears in the global address list (GAL). From Outlook on the web, the users can see the new user in the GAL immediately.
You need to reduce the amount of time it takes for new users to appear in the GAL in Outlook 2019.
What should you do?

Modify the default email address policy.

Create as address book policy (ABP).

Create a scheduled task that runs the Update-GlobalAddressList cmdlet.

Modify the offline address (OAB) schedule.

Explanation
References:
https://www.howto-outlook.com/howto/oabupdate.htm#syncschedules

NEW QUESTION 139
You have a Microsoft Exchange Online tenant named contoso.com.
Email messages from a remote domain named fabrikam.com are received from a server that uses a wildcard certificate for fabrikam.com and are encrypted by using TLS.
Fabrikam.com is switching to a third-party cloud filtering service for inbound and outbound email. The IP address used by the third-party service is 131.107.200.10.
You need to reconfigure the connector to only accept messages from fabrikam.com that are encrypted and received from the third-party service.
Which two settings should you modify for the connector? To answer, select the appropriate settings in the answer area.
NOTE: Each correct selection is worth one point.

Reference:
https://docs.microsoft.com/en-us/exchange/mail-flow-best-practices/use-connectors-to-configure-mail-flow/set-up-connectors-for-secure-mail-flow-with-a-partner

NEW QUESTION 140
You have a Microsoft Exchange Server 2019 organization that uses a namespace of contoso.com.
Email address policies for contoso.com are configured as shown in the Address Policies exhibit.

The Marketing email address policy is shown in the Marketing Policy exhibit.

The Sales email address policy is shown in the Sales Policy exhibit.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Reference:
https://docs.microsoft.com/en-us/exchange/email-addresses-and-address-books/email-address-policies/email-address-policies?view=exchserver-2019

NEW QUESTION 141
Use the drop-down menus to select the answer choice that complete each statement based on the information presented in the Exchange Online Connector exhibit.
NOTE: Each correct selection is worth one point.

Topic 3, Fabrikam, Inc
Existing Environment
Network Environment
The on-premises network of Fabrikam contains an Active Directory domain named fabrikam.com.
Fabrikam has a Microsoft 365 tenant named fabrikam.com. All users have Microsoft 365 Enterprise E5 licenses.
User accounts sync between Active Directory Domain Services (AD DS) and the Microsoft 365 tenant.
Fabrikam.com contains the users and devices shown in the following table.

Fabrikam currently leases mobile devices from several mobile operators.
Microsoft Exchange Online Environment
All users are assigned an Outlook Web App policy named FilesPolicy.
In-Place Archiving is disabled for Exchange Online.
You have the users shown in the following table.

User1 and User3 use Microsoft Outlook for iOS and Android to access email from their mobile device. User2 uses a native Android email app.
A Safe Links policy in Microsoft Defender for Office 365 is applied to the fabrikam.com tenant. The marketing department uses a mail-enabled public folder named FabrikamProject.
Default MRM Policy is disabled for the fabrikam.com tenant.
Problem Statements
Fabrikam identifies the following issues:
Users report that they receive phishing emails containing embedded links.
Users download and save ASPX files when they use Outlook on the web.
Email between Fabrikam and Litware is unencrypted during transit.
User2 reports that he lost his mobile device.
Requirements
Planned Changes
Fabrikam plans to implement the following changes:
Configure FilesPolicy to prevent Outlook on the web users from downloading attachments that have the ASPX extension.
Purchase a new smartboard and configure the smartboard as a booking resource in Exchange Online.
Ensure that the new smartboard can only be booked for a maximum of one hour.
Allow only Admin1 to accept or deny booking requests for the new smartboard.
Standardize mobile device costs by moving to a single mobile device operator.
Migrate the FabrikamProject public folder to Microsoft SharePoint Online.
Enable In-Place Archiving for users in the marketing department.
Encrypt all email between Fabrikam and Litware.
Technical Requirements
Fabrikam identifies the following technical requirements:
Ensure that the planned Sharepoint site for FabrikamProject only contains content that was created during the last 12 months.
Any existing file types that are currently configured as blocked or allowed in the FilesPolicy policy must remain intact.
When users leave the company, remove their licenses and ensure that their mailbox is accessible to Admin1 and Admin2.
Generate a report that identifies mobile devices and the mobile device operator of each device.
Use the principle of least privilege.
Minimize administrative effort.
Retention Requirements
Fabrikam identifies the following retention requirements for all users:
Enable users to tag items for deletion after one year.
Enable users to tag items for deletion after two years.
Enable users to tag items to be archived after one year.
Automatically delete items in the Junk Email folder after 30 days.
Automatically delete items in the Sent Items folder after 300 days.
Ensure that any items without a retention tag are moved to the Archive mailbox two years after they were created and permanently deleted seven years after they were created.

NEW QUESTION 142
You need to resolve the email delivery delay issue.
What should you do?

From the Security & Compliance admin center, modify the safe attachments policy

From the Security & Compliance admin center, create a supervision policy.

From the Exchange admin center in Exchange Online, modify the antimalware policy.

From the Exchange admin center in Exchange Online, modify the spam filter policy.

Explanation
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/dynamic-delivery-and-previewing

NEW QUESTION 143
You have a Microsoft Exchange Online tenant named contoso.com.
You create a partnership with two other companies named fabrikam.com and wingtiptoys.com. All the mailboxes of fabrikam.com are hosted in Microsoft 365. All the mailboxes of wingtiptoys.com are hosted in an on-premises Exchange Server 2019 organization.
You need to ensure that all the email messages sent from contoso.com to fabrikam.com and wingtiptoys.com is encrypted by using TLS.
What should you do?

Create an organizational relationship.

Create two remote domains.

Configure two mail flow rules.

Run the Office 365 Exchange Hybrid Configuration wizard.

Configure one connector.

Explanation/Reference:
https://docs.microsoft.com/en-us/exchange/mail-flow-best-practices/use-connectors-to-configure-mail-flow/ set-up-connectors-for-secure-mail-flow-with-a-partner Plan and implement a hybrid configuration and migration Question Set 1

NEW QUESTION 144
You have a Microsoft Exchange Online tenant that contains a retention policy named Policy1 and a user named User1.
Policy1 is assigned to all users and contains the retention tags shown in the following table.

Tag3 is applied to an email message in the inbox of User1.
You remove Tag3 from Policy1.
What will occur to the message?

The existing retention tag will be retained.

The existing retention tag will be removed.

The default mailbox retention tag will apply.

The default folder retention tag will apply.

Reference:
https://docs.microsoft.com/en-us/exchange/security-and-compliance/messaging-records-management/retention-ta

NEW QUESTION 145
You recently migrated all the on-premises mailboxes from Microsoft Exchange Server 2019 to Exchange Online.
You decommission the on-premises Exchange Server 2019 servers.
The finance department at your company reports that email delivery from several printers fails after Exchange Server 2019 is decommissioned.
You need to ensure that the printers can deliver email successfully to the users in the finance department.
What should you do?

Create a resource mailbox for each printer.

Create an Inbound connector that has certificate validation disabled.

Create an Inbound connector that is configured to allow SMTP relay.

Create an Office 365 group for each printer.

Explanation/Reference:
https://docs.microsoft.com/en-us/exchange/mail-flow-best-practices/use-connectors-to-configure-mail-flow/ use-connectors-to-configure-mail-flow

NEW QUESTION 146
You need to implement a solution that meets the technical requirements for the retention of junk email, sent items, and deleted items.
What is the minimum number of retention policies and retention tags you should use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Loading …

Planning and Implementing a Hybrid Configuration and Migration

From the name, this objective addresses one’s ability to plan and adopt a hybrid environment and also plan and implement the migration. It also proves the candidate’s mastery of the technical skills required to effortlessly manage and implement public folders. This section requires one to become proficient in access configuration, using HCW, understanding various methods of migration, content movement, the implementation of public folders as well as planning their migration, and others.

Pass Your MS-203 Exam Easily – Real MS-203 Practice Dump Updated Nov 14, 2022: https://www.latestcram.com/MS-203-exam-cram-questions.html

Related Certifications

C_S4CMA_2208 (1)
C_TAW12_750 (1)
C_S4CPR_2208 (1)
C-TB1200-10 (1)
P-SECAUTH-21 (2)
C-HCADM-02 (1)
P-SAPEA-2023 (1)
C_TFG50_2011 (2)
C-S4CSV-2208 (1)
C_ARSUM_2302 (1)

Free Cram & Latest Exams Dumps