Free Cram & Latest Exams Dumps

NO.41 Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains the domains shown in the following table.

You are implementing Microsoft Defender for Identity sensors.
You need to install the sensors on the minimum number of domain controllers. The solution must ensure that Defender for Identity will detect all the security risks in both the domains.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.42 You have an on-premises network and an Azure virtual network.
You establish a Site-to-Site VPN connection from the on-premises network to the Azure virtual network, but the connection frequently disconnects.
You need to debug the IPsec tunnel from Azure.
Which Azure VPN Gateway diagnostic log should you review?

NO.43 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains a single-domain Active Directory Domain Services (AD DS) forest named contoso.com. The functional level of the forest is Windows Server 2012 R2. All domain controllers run Windows Server 2012 R2.
Sysvol replicates by using the File Replication Service (FRS).
You plan to replace the existing domain controllers with new domain controllers that will run Windows Server
2022.
You need to ensure that you can add the first domain controller that runs Windows Server 2022.
Solution: You run the Active Directory Migration Tool (ADMT).
Does this meet the goal?

NO.44 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server.
You need to ensure that only specific applications can modify the data in protected folders on Server1.
Solution: From App & browser control, you configure the Exploit protection settings.
Does this meet the goal?

NO.45 You have an Azure virtual machine named VM1 that runs Windows Server.
You need to encrypt the contents of the disks on VM1 by using Azure Disk Encryption.
What is a prerequisite for implementing Azure Disk Encryption?

NO.46 You have an Azure virtual machine named VM1.
You enable Microsoft Defender SmartScreen on VM1.
You need to ensure that the SmartScreen messages displayed to users are logged.
What should you do?

NO.47 You need to meet the technical requirements for Cluster3.
What should you include in the solution?

NO.48 What is the effective minimum password length for User1 and Admin1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.49 You have two servers that have the Web Server (IIS) server role installed. The servers are configured as shown in the following table.

Both servers are configured to enable website deployment by using the Web Deployment Tool. Server1 hosts a website named Site1 that has Web Deploy Publishing configured.
You plan to migrate Site1 to Server2.
You need to perform a pull synchronization of Site1 by using the Web Deployment Agent Service.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.50 You need to configure BitLocker on Server4.
On which volumes can you turn on BitLocker, and on which volumes can you turn on auto-unlock? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.51 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a failover cluster named Cluster1 that hosts an application named App1.
The General tab in App1 Properties is shown in the General exhibit. (Click the General tab.)

The Failover tab in App1 Properties is shown in the Failover exhibit. (Click the Failover tab.)

Server1 shuts down unexpectedly.
You need to ensure that when you start Server1, App1 continues to run on Server2.
Solution: From the Failover settings, you select Prevent failback.
Does this meet the goal?

NO.52 You have three Azure virtual machines named VM1, VM2, and VM3 that host a multitier application.
You plan to implement Azure Site Recovery.
You need to ensure that VM1, VM2, and VM3 fail over as a group.
What should you configure?

NO.53 You have an Azure subscription that contains an Azure Recovery Services vault.
You have an on-premises physical server that runs Windows Server.
You need to back up the server daily to Azure.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

NO.54 You plan to deploy the Azure Monitor agent to 100 on-premises servers that run Windows Server.
Which parameters should you provide when you install the agent?

NO.55 You have an Azure virtual machine named VM1 that runs Windows Server. VM1 has boot diagnostics configured to use a managed storage account.
You are troubleshooting connectivity issue on VM1.
You need to run a PowerShell cmdlet on VM1 by using the Azure Serial Console.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

NO.56 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains a single-domain Active Directory Domain Services (AD DS) forest named contoso.com. The functional level of the forest is Windows Server 2012 R2. All domain controllers run Windows Server 2012 R2.
Sysvol replicates by using the File Replication Service (FRS).
You plan to replace the existing domain controllers with new domain controllers that will run Windows Server
2022.
You need to ensure that you can add the first domain controller that runs Windows Server 2022.
Solution: You migrate sysvol from FRS to Distributed File System (DFS) Replication.
Does this meet the goal?

NO.57 You have a server named Server1 that runs Windows Server and has the Hyper-V server role installed. You have a Hyper-V failover cluster named Cluster1. All servers are members of the same domain.
You need to ensure that you use Hyper-V Replica with Kerberos authentication on the default port to replicate virtual machines from Cluster1 to Server1.
What should you do on Server1?

NO.58 You have an Azure virtual machine named VM1. Crash dumps for a process named Process1 are enabled for VM1.
When process1.exe on VM1 crashes, a technician must access the memory dump files on the virtual machine.
The technician must be prevented from accessing the virtual machine.
To what should you provide the technician access?

NO.59 You are remediating the firewall security risks to meet the security requirements.
What should you configure to reduce the risks?

NO.60 Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains the servers shown in the following table.

Server3 contains a share named Share1.
On Server1, DHCP has the following configurations:
Conflict detection attempts: 3
An IPv4 scope named Scope1 that has the following settings:
1.Address Pool: 172.16.10.100 – 172.16.10.130
2.Address Leases:
– 172.16.10.100 computer1.contoso.com
– 172.16.10.101 computer2.contoso.com
Reservations: 172.16.10.101 computer2.contoso.com
Policies: Policy1
You perform the following actions:
* On Server1, you run
Export-DhcpServer -File \Server3Share1File1.xml.
* On Server2, you run
Import-DhcpServer -File \Server3Share1File1.xml
-BackupPath \Server3Share1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

NO.61 You have two servers named Server1 and Server2 that run Windows Server. Both servers have the Hyper-V server role installed.
Server1 hosts three virtual machines named VM1, VM2, and VM3. The virtual machines replicate to Server2.
Server1 experiences a hardware failure.
You need to bring VM1, VM2, and VM3 back online as soon as possible.
From the Hyper-V Manager console on Server2, what should you run for each virtual machine?