You are currently here!
  • Home
  • Cisco 300-430 300-430 Free Study Guide! with New Update 218 Exam Questions [Q102-Q118]

300-430 Free Study Guide! with New Update 218 Exam Questions [Q102-Q118]

Rate this post

300-430 Free Study Guide! with New Update 218 Exam Questions

Get up-to-date Real Exam Questions for 300-430 UPDATED [2023]

Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Certification Path

Cisco 300-430: Implementing Cisco Enterprise Wireless Networks exam is affiliated with the CCNP Service Provider and Cisco Accredited Professional-Service Provider wireless networks Implementation certifications. This is the official prerequisite for this exam. However, the course, cisco enterprise wireless networks, allows applicants to prepare for this exam and is highly recommended. 300-430 exam dumps is the best start towards the preparation of the exam.

Hover on to Cisco’s Website and complete the official training course provided for the exam. Check for the topics mentioned in the exam Outline section of this guide to review the online documentation, tip sheets, and user guides and study the details relevant to those topics. Refer to the links at the end of this document for more study material.

Cisco 300-430 Exam Syllabus Topics:

Topic Details
Topic 1
  • Configure Client Profiling On WLC And ISE
  • Deploy MSE And CMX On A Wireless Network
Topic 2
  • Implement Identity-Based Networking On Different Wireless Architectures
  • Deploy Flexconnect Capabilities
Topic 3
  • Deploy Flexconnect Components Such As Switching And Operating Modes
  • Implement Location Services
Topic 4
  • Implement Multicast On A WLAN
  • Implement Multicast Direct
  • Implement CMX Components
Topic 5
  • Native Supplicant Provisioning Using ISE
  • VLAN-Based Central Switching And Flex ACL
Topic 6
  • Implement CPU Acls On The Controller
  • Manage Alarms And Rogues (Aps And Clients)
  • Implement Multicast Components
Topic 7
  • Troubleshoot CMX High Availability
  • Implement Qos Schemes Based On Requirements Including Wired To Wireless Mapping
Topic 8
  • Troubleshoot Location Accuracy Using Cisco Hyperlocation
  • CWA Using ISE (Including Self-Registration Portal)
Topic 9
  • Certificate Provisioning On The Controller
  • Implement AVC Including Fastlane (Only On WLC)
Topic 10
  • Troubleshoot Client Connectivity
  • Implement Qos For Wireless Clients
Topic 11
  • Implement Access Point Authentication (Including 802.1X)
  • Utilize Reports On PI And Cisco DNA Center
Topic 12
  • Implement BYOD And Guest
  • Flexconnect Groups And Roaming
  • Implement Office Extend

 

NO.102 Refer to the exhibit.

A wireless engineer has integrated the wireless network with a RADIUS server. Although the configuration on the RADIUS is correct, users are reporting that they are unable to connect. During troubleshooting, the engineer notices that the authentication requests are being dropped. Which action will resolve the issue?

 
 
 
 

NO.103 An engineer is configuring multicast for wireless for an all-company video meeting on a network using EIGRP and BGP within a single domain from a single source. Which type of multicast routing should be implemented?

 
 
 
 

NO.104 Which three things do you need to consider prior to performing a wireless site survey? (Choose three.)

 
 
 
 
 
 

NO.105 What is the difference between PIM sparse mode and PIM dense mode?

 
 
 
 

NO.106 An engineer must create an account to log in to the CLI of an access point for troubleshooting. Which configuration on the WLC will accomplish this?

 
 
 
 

NO.107 An engineer is configuring multicast for two WLCs. The controllers are in different physical locations and each handles around 500 wireless clients. How should the CAPWAP multicast group address be assigned during configuration?

 
 
 
 

NO.108 An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)

 
 
 
 
 

NO.109 A wireless engineer must configure access control on a WLC using a TACAS+ server for a company that is implementing centralized authentication on network devices. Which role must be configured under the shell profile on the TACAS+ server for a user with ready-only permissions?

 
 
 
 

NO.110 An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?

 
 
 
 

NO.111 On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised. Considering that FlexConnect local switching is enabled, which setting is causing this behavior?

 
 
 
 

NO.112 What is configured to use more than one port on the OEAP to extend the wired network’s?

 
 
 
 

NO.113 An engineer is managing a wireless network for a shopping center. The network includes a Cisco WLC, a Cisco MSE, and a Cisco Prime Infrastructure. What is required to use Cisco CMX Location Analytics?

 
 
 
 

NO.114 Which QoS level is recommended for guest services?

 
 
 
 

NO.115 What must be configured on ISE version 2.1 BYOD when using Single SSID?

 
 
 
 

NO.116 An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?

 
 
 
 

NO.117 A customer wants the APs in the CEO’s office to have different usernames and passwords for administrative support than the other APs deployed throughout the facility. Which feature must be enabled on the WLC and APs to achieve this goal?

 
 
 
 

NO.118 A customer managing a large network has implemented location services. Due to heavy load, it is needed to load balance the data coming through NMSP from the WLCs. Load must be spread between multiple CMX servers to help optimize the data flow for APs. Which configuration in CMX meets this requirement?

 
 
 
 

Preparation Process for Cisco 300-430 Exam

The potential candidates for Cisco 300-430 can explore a wide range of resources for their preparation for this exam. To get started, Cisco recommends the official training course, which is Implementing Cisco Enterprise Wireless Networks v1.1. This option equips them with the skills and knowledge required to develop secure wireless network infrastructures as well as troubleshoot any associated issues. They also will discover the process of implementing and fortifying wireless network infrastructures with the use of Cisco Identity Service Engine, Cisco Connect Mobile Experience, and Cisco Prime Infrastructure for troubleshooting and monitoring the network issues. Other tools that can be used for your preparation process include practice tests, video tutorials, flashcards, and more. These materials are available on various reputable IT training platforms.

 

Pass Cisco 300-430 Exam in First Attempt Guaranteed: https://www.latestcram.com/300-430-exam-cram-questions.html

leave a comment

Enter the text from the image below