Free Cram & Latest Exams Dumps

QUESTION 104
While configuring Cisco NSF awareness, a network engineer enters the bgp graceful-restart command after the BGP session is established in a router that runs IOS XE Software. Graceful restart capabilities are not exchanged. Which two actions should be taken? (Choose two.)

QUESTION 105
Refer to the exhibit.

Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?

QUESTION 106
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.

QUESTION 107
Refer to the exhibit.

Refer to the exhibit. This network is deployed with all connected links configured to run IS-IS. The routing protocol is enacted globally on each router, and the network engineer expects full routing Information to be shared among all routers. R5 is receiving routes from R4 but is missing routes from R1. Which action corrects the issue so that all routes are shared among the routers?

QUESTION 108
Refer to the exhibit.

XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed. Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?

QUESTION 109
Refer to the exhibit

An engineer is configuring service traffic from router R1 to R6 as shown. Which additional configuration must the engineer implement so that the LDP and SR domains will participate and interwork with each other?

QUESTION 110
Refer to the exhibit.

A network engineer applied configuration on R5 to summarize all OSPF routes, but R4 is still receiving specific routes from R5. The engineer has confirmed that both R5 and R4 routers are configured with correct summarization configuration but R5 Is not sending the summary routes What action must the engineer take to fix the problem?

QUESTION 111
Which difference must an engineer consider when choosing whether to implement OSPF or IS-IS as the routing protocol on the network?

QUESTION 112
Which two of the following are true regarding the BGP Prefix-Based outbound route filtering feature? (Choose two.)

QUESTION 113
Which statement about BFD on Cisco IOS XR Software is true?

QUESTION 114
Refer to the exhibit. A network operators configuring BGP PIC on CE1 on already established neighborships with PE1ana PE2 inside the fully converged MPLS network.
Which element needs to be implemented to make this feature function effectively?

QUESTION 115
Drag and Drop Question
An engineer is troubleshooting end-to-end customer traffic across an MPLS VPN service provider network.
Which tasks should the engineer use to solve the routing issues?
Drag and drop the table types from the left onto the most useful troubleshooting tasks/router types on the right. (Not all options are used.)

QUESTION 116

Refer to the exhibit. Why is neighbor 10.1.5.5 stuck in “2WAY” state?

QUESTION 117
Refer to the exhibit.

How are packets directed through the data plane when SRv6 is implemented?

QUESTION 118
Refer to the exhibit.

There is a connectivity issue between Customer-1 and Customer-2 File servers between the customers cannot send critical data R3 routes are missing from the routing table on the Customer-1 router All interlaces on Customer-1 are up Which configuration must be applied to router R2 to correct the problem?

QUESTION 119
Refer to the exhibit.

What is the relationship between Router 1 and Router 2?

QUESTION 120
Refer to the exhibits.

All links inside the network are configured at a default cost of one inside the fully converged OSPF domain. Given the configuration from XR1, which interface does traffic from XR1 that is destined to the loopback interface of XR6 select for the exiting interface?

QUESTION 121
Refer to the exhibit.

CE1 and CE2 cannot communicate through the service provider BGP peering is established between PE1 and PE2. IS-IS is the only routing protocol running in the service provider core.
What
step can be done to troubleshoot the issue?

QUESTION 122
Which keyword is used with the match route-type command to redistribute the external BGP and IGP routes using route map?

QUESTION 123
Refer to the exhibit. Which tree does multicast traffic follow?

QUESTION 124
After an engineer configures BGP in R1, it starts receiving this message
*Jun 29 13:30:50.122: %BGP-5-ADJCHANGE: neighbor 192.168.10.1 Down User reset Jun 29 13:30:52.341: %BGP-3-NOTIFICATION: sent to neighbor 192.168.10.1 2/6 (unacceptable hold time) 0 bytes Which action makes the peering come back up again?

QUESTION 125
Refer to the exhibit.

Refer to the exhibit. A service provider has LDP and segment routing running in the network. Mobility traffic is carried through LDP and enterprise traffic is carried through segment routing. Which configuration must be implemented to connect the bank branch with the HUB site on routers?

QUESTION 126
What is used by SR-TE to steer traffic through the network?

QUESTION 127
Refer to the exhibit. Router R1 is configured to advertise outgoing SA messages to routers R2 and R3, but to receive incoming SA messages only from R2. Which additional configuration must an engineer apply to router R1 so it filters all MSDP SA messages from Domain-C?