Provide Valid MB-320 Dumps To Help You Prepare For Microsoft Dynamics 365 Supply Chain Management, Manufacturing Exam Nov 30, 2022 [Q27-Q44]

November 30, 2022 latestexam 0 Comments

Rate this post

Provide Valid MB-320 Dumps To Help You Prepare For Microsoft Dynamics 365 Supply Chain Management, Manufacturing Exam Nov 30, 2022

Microsoft MB-320 Dumps Questions [2022] Pass for MB-320 Exam

Q27. A company uses Dynamics 365 for Finance and Operations for Process manufacturing.
Employees spend considerable time cleaning and setting up machines in a specific area between production orders. You must group production activities to optimize cleaning and set up time.
You need to set up the system.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.

Q28. A glass bottle manufacturer uses route operations to schedule resources and track manufacturing costs.
The company has recently seen an increase in demand and purchases another resource. The company uses the same costs per resource. However, the new resource costs more to run. The company must be able to track cost contributions for the new resource.
You need to create a cost category for the new resource.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: Each correct selection is worth one point.

Explanation

Q29. You manage pricing for a food processing company. The raw materials used by the business is a commodity-traded product and has a changing purchase price.
You must implement the commodity pricing module. You create a pricing template with margin data.
You need to calculate the cost price for the manufactured goods as well as the sales price based on margin standards.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Explanation

Q30. A company that produces rubber hose using Discreet orders accounts for raw material scrap after report as finished though inventory movement journals.
The company has noticed that most of the scrap that is recorded is due to start up that feeds the hose to the finishing process. In addition, the amount of scrap that is recorded is consistent regardless of the amount of hose being produced.
You need to account for material lost during startup.
What should you do?

Do a case study for the scrap items and enter the average amount of scrap as a separate line items on the Bill of materials.

Enter the amount of scrap that is consumed as constant scrap in the Bill of materials.

Enter the amount of scrap that is consumed as variable scrap in the Bill of materials.

Enter the consumption amount on the line to match the actual amount used.

Q31. A company that uses discreet manufacturing concepts to produce solar panels has a temporary change of glass supplier. The substitute glass will only be used for three months. The company also uses Bill of materials (BOM) version to track changes of the raw materials.
Managers are manually adjusting the production picking lists to reflect the alternate glass that is being temporarily used. The time spent doing manual adjustments to production picking lists has become a burden.
You need to create a new BOM with the alternate glass and include a from and to date on the BOM version.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Explanation

Q32. You are the product manager at a distribution company. You are responsible for managing product compliance standards and reporting.
Chemical product, C00D1 can be sold in all parts of the United States except for the state of California.
You need to set up these compliance requirements for C0001.
Which four actions should be performed in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

1 – Create a regulated products regional list for California, United States. Add item C0001 to the list.
2 – Create an exclusive list type for California, United States.
3 – Open the Regulated products regional lists.
4 – Create an inclusive list type for New York, United States.

Q33. You are responsible for product and formula maintenance for a paint manufacturer.
You create a formula for white paint and add its lines. When the formula size increases or an ingredient changes, the quantity of the pigment ingredient must be adjusted proportionately.
You need to set up the formula line for the pigment.
Which formula feature should you use?

Pegged supply

Step consumption

Scalable

Variable

Section: Create and manage production and lean orders
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/formulas- versions#use-the-scalable-feature

Q34. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company implements Dynamics 365 for Finance and Operations for their Lean manufacturing environment.
There has been an engineering change to a fixed quantity product that is in production. This change will add an additional processing step as the second step. The existing version must be phased out and replaced by the new version.
You need to ensure that the engineering change takes affect at the end of the month.
Solution:
1.) Create an activity for the new process step and add it to the existing production flow. Set the expiration date to the end of the month
2.) Create a Kanban rule that incorporates the new activity with an effective date of end of the month
3.) Edit the existing Kanban rule. Set the expiration date to the end of the month.
4.) Activate the new production flow
Does the solution meet the goal?

Yes

Section: Create and manage production and lean orders

Q35. You need to configure the bicycles’ production resource.
Which option should you use?

Exclusive capacity set to yes and enter a Batch capacity.

Exclusive capacity set to no and infinite capacity.

Exclusive capacity set to yes and infinite capacity.

Exclusive capacity set to no and enter a Batch capacity.

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/operations-resources

Q36. A company uses Lean manufacturing concepts to produce paper plates redesigned the layout of the warehouse and production floor.
The company’s production flow activities no longer match the tasks of the workers Employees use paper and manual communication to complete the tasks.
You need to update the production flows to match their current processes by deactivating the obsolete production flows and creating new ones.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Q37. A company uses Dynamics 365 for Finance and Operations for Process manufacturing.
You are reviewing the planned production orders for the next two weeks. There are several production orders for the same product. One order is scheduled to run the week after another order.
You need to optimize the planned production orders.
What should you do?

Rerun master planning. Select the static plan with a coverage time fence of two weeks.

Firm the orders

In Planned orders, combine the production orders

Rerun master planning. Select the dynamic plan with a coverage time fence of two weeks

Section: Create, process, and manage production batch orders

Q38. You need to create the production orders for standard model bicycles.
Which method should you use?

Sales order line

Master planning execution

Supply schedule form

Released item

All production orders form

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/master-planning/supply-schedule

Q39. You are the product manager at an orange juice manufacturing company.
For every 1,000 pounds of orange juice, 20 pounds of orange pulp is created which can be sold or reused profitably. The cost is calculated as a weighted average between the quantity of orange juice that is reported as finished and the orange pulp based on the standard cost of each item.
You need to create the formula for orange juice that will produce orange pulp as a result of finishing a batch order.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Q40. A company produces light projection toys for holiday decorations. The company plans to implement Lean manufacturing processes.
Production master data must meet the following requirements:
* Visual templates for a holiday must only be included for in-store products where that holiday is celebrated
* Visual templates for a holiday must only be included for in-store products based upon that season
* Online customers must be able to order visual templates for any holiday or region.
You need to implement production master data.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Explanation

Q41. A company implements Dynamic 365 for Finance and Operations. You run the latest master plan. You observe invalid results.
You need to set up tracing for the master plan.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

Explanation

Q42. You maintain responsible resource calendars and production orders for a manufacturing company. All production resources use the same production calendar.
A machine in the facility is defective and must be closed for repairs for the next two days.
You need to configure the resource calendar to close the resource for production for the next two days.
What should you do?

Navigate to the resource group. Change the calendar to closed on the resource group.

Navigate to the calendar used for production and close the next two days.

Navigate to the resource. Change the calendar to closed on the resource.

Navigate to the resource and select Calendar deviations. Set the calendar to closed for the next two days.

Section: Set up and configure manufacturing

Q43. A company produces lotions for pain relief and uses Dynamics 365 for Finance and Operations.
You have been provided the following information for a new relieving lotion.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Explanation

Q44. A company uses separate finished good item numbers for size variations of the same product.
The company wants to minimize the number of variously-sized items that are created.
You need to perform the setup to allow variants in size to the product master.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.