Free 1Z0-1075-26 braindumps download (1Z0-1075-26 exam dumps Free Updated Oct 05, 2026) [Q16-Q31]

Free 1Z0-1075-26 braindumps download (1Z0-1075-26 exam dumps Free Updated Oct 05, 2026) [Q16-Q31]

October 5, 2026 latestexam 0 Comments

Rate this post

Free 1Z0-1075-26 braindumps download (1Z0-1075-26 exam dumps Free Updated Oct 05, 2026)

1Z0-1075-26 Dumps for Pass Guaranteed – Pass 1Z0-1075-26 Exam 2026

Oracle 1Z0-1075-26 Exam Syllabus Topics:

Section	Objectives
Manufacturing Planning Integration	– Integration with supply chain planning – Material and resource planning
Shop Floor Management	– Production tracking and reporting – Work execution monitoring
Manufacturing Configuration and Setup	– Plant and resource configuration – Setup of manufacturing parameters
Quality and Costing in Manufacturing	– Quality inspection integration – Manufacturing costing principles
Work Definition and Work Execution	– Work definitions and structures – Work order execution and control
Manufacturing Cloud Fundamentals	– Manufacturing execution overview – Core Manufacturing concepts in Oracle Cloud

Q16. A Production Supervisor queries a work order, WO-1025, from the Manage Work Orders page. On the Entering Edit Work Order: WO-1025 page, the supervisor finds a General Information, Operations, and History tab, but no Reservations tab.
What are two reasons for the Reservations tab not being displayed for WO-1025?

It is not a Configured Item work order.

It Is not a Drop-Ship work order.

It is not a Pick-to-Order work order.

It is not a Plan-to-Produce work order.

It is not a Back-to-Back work order.

In Oracle Manufacturing Cloud, the Reservations tab on the Edit Work Order page is displayed only for specific types of work orders that require reservations of components or materials. The absence of the Reservations tab in work order WO-1025 indicates that the work order is not one of the following types:
Configured Item Work Order (A): Configured items are typically built based on specific customer requirements, and reservations of components are often necessary. Since WO-1025 is not a configured item work order, the Reservations tab is not shown.
Back-to-Back Work Order (E): Back-to-back work orders are linked to sales orders and require reservations of materials to fulfill the specific demand. Since WO-1025 is not a back-to-back work order, the tab is not displayed.
Incorrect options:
B, C, D: Drop-Ship, Pick-to-Order, and Plan-to-Produce work orders do not typically require reservations in the same way as configured or back-to-back orders, which is why they are not the reasons for the absence of the Reservations tab.

Q17. Which option represents all the production exception types that can be reported by a Production Operator in Oracle Manufacturing Cloud?

Work Area, Work Center, and Resources

Work Area. Work Center. Resources, Components, and Miscellaneous

Resources and Components

Work Center and Resources

Work Area, Work Center, Resources, and Components

In Oracle Manufacturing Cloud, production operators can report several types of production exceptions that affect the flow of the production process. The complete list of production exception types that can be reported includes:
Work Area: Issues related to the broader production environment.
Work Center: Problems or exceptions that arise at specific work centers.
Resources: Issues with labor, machines, or tools that are part of the production process.
Components: Exceptions related to materials or components used in manufacturing.
Incorrect options:
Options A, B, C, D are incomplete and miss one or more of the exception types available in Oracle Manufacturing Cloud.

Q18. A manufacturing plant works in two shifts of eight hours each. A Manufacturing user wants four units of a work center resource, R1, to be available during nonworking time, outside the regular shift on a particular day.
Which is the correct sequence of steps to create a resource exception on the Manage Work Center Resource Calendar page?

Click Inside the existing shift time on a specific date > Go to the Create Work Center page > Click the Resource Availability tab > Click the Add icon > Select R1 from the Resource dropdown list > Enter 4 in Default Units Available.

Click inside the existing shift time on a specific date > Go to the Actions menu > Select Create Resource Exception > Populate the Start and Duration Fields > Go to the Resource Availability region > Populate A units in the Default Availability column.

Click outside the existing shift time on a specific date > Go to the Actions menu > Select Create Resource Exception > Populate the Start and Duration fields > Go to the Resource Availability and Overrides region > Populate 4 units in the Availability Override column.

Click outside the existing shift time on a specific date > Go to the Create Work Center page > Click the Resource Availability tab > Click the Add icon > Select R1 from the Resource drop-

In Oracle Manufacturing Cloud, to make a resource (R1) available outside the regular shift for a specific day, you need to create a resource exception. This allows you to override the default shift schedule and make additional units of the resource available.
Click outside the existing shift time ensures that the exception applies to non-working hours.
Select Create Resource Exception from the Actions menu to initiate the exception.
Populate the Start and Duration fields to define the non-working period during which the resource will be available.
Enter 4 units in the Availability Override column to ensure that 4 units of resource R1 are made available for use during the exception period.

Q19. Which three actions can a supervisor perform to annul or correct mistakes in a completed work order, committed by a user while entering work order details?

Reverse a Closed order to Open.

Correct the Product entered at work order.

Reverse from Scrap to Ready.

Reverse at an operation.

Reverse the product at the last operation.

If a mistake is made in a completed work order, supervisors have the ability to perform certain corrective actions to reverse transactions or correct errors:
Reverse from Scrap to Ready (C): This action allows the supervisor to reverse a product that was incorrectly marked as scrap back to a ready state, making it available for further operations.
Reverse at an operation (D): If the mistake occurred during a specific operation, the supervisor can reverse the transaction at that operation and correct the mistake.
Reverse the product at the last operation (E): The supervisor can reverse a transaction at the last operation to make corrections to the final product before closing the work order.
Incorrect options:
A (Reverse a Closed order to Open): Once a work order is closed, it cannot be reopened. Reversing transactions must happen before the order is officially closed.
B (Correct the Product entered at work order): The product specified in a work order cannot be changed once the order has been processed and completed.

Q20. You create a work order, in which some of the operations have components with the Push supply type. While reporting material consumption on the Report Material Transaction page, you want the Push components to default whenever the operator selects Show Components.
Which setup task must you perform in the Manage Plant Parameters section to achieve this?

Set Default Transaction Mode to Entered and Default Transaction Quantity to Work Definition.

Set Default Transaction Mode to Work Definition.

Set Default Transaction Mode to AIL

Set Default Transaction Mode to Entered.

To ensure that Push components are automatically defaulted when reporting material consumption on the Report Material Transaction page, you must configure the system to use the Work Definition as the default source for transactions.
Setting Default Transaction Mode to Work Definition ensures that the system automatically pulls the component list and quantities as defined in the work order or work definition when operators perform material transactions. This setting streamlines the material consumption process for Push supply type components.

Q21. A Production Operator needs to load work order operation transactions from an external system into Manufacturing Cloud.
What is the correct sequence of tasks to achieve this?

Export file to UCM server > Load data to data repository > Process import operations transactions > Load file from UCM to interface table.

Load data to data repository > Load file from UCM to interface table > Export file to UCM server > Process import operations transactions.

Load data to data repository > Export file to UCM server > Process import operations transactions > Load file from UCM to Interface table.

Load data to data repository > Export file to UCM server > Load file from UCM to interface table > Process import operations transactions.

When loading work order operation transactions from an external system into Oracle Manufacturing Cloud, the correct sequence of tasks is:
Load data to the data repository: This step ensures the external data is available in Oracle Manufacturing Cloud.
Export file to UCM server: The data file is then exported to the Universal Content Management (UCM) server, which acts as a staging area for further processing.
Load file from UCM to interface table: The data from the UCM server is loaded into the appropriate interface table.
Process import operations transactions: Finally, the system processes the imported transactions and updates the work orders accordingly.
Incorrect sequences:
Options A, B, C do not follow the correct order, particularly around the interaction between the UCM server and the interface tables.

Q22. Which three statements are true about executing rework work orders with manual control?

You can perform operation completion only after the assembly has been issued to the work order, and only up to the quantity that the assembly component item Is issued to the work order.

You can cancel the work order after releasing it and after performing any transactions.

You must manually issue the assembly item to rework a work order, either partial or full quantity.

You cannot cancel the work order after releasing it or after performing any transactions.

If the group has grouping attributes, only work orders that match the grouping attribute values can be assigned to the groups.

In Oracle Manufacturing Cloud, executing rework work orders with manual control requires certain steps and restrictions to ensure proper tracking of rework activities:
Statement A: You can perform operation completion only after the assembly item has been issued to the work order. The quantity that can be completed is limited to the quantity of the assembly issued.
Statement C: The assembly item must be manually issued to the work order, allowing for flexibility to issue either a partial or full quantity depending on the rework requirements.
Statement D: Once a work order is released and transactions have been performed, it cannot be canceled. This ensures that work orders already in progress are tracked properly.
Incorrect options:
Statement B: This is incorrect because you cannot cancel the work order after performing transactions.
Statement E: This statement is irrelevant in the context of executing rework work orders with manual control.

Q23. Which three entities must you set up in Oracle Manufacturing Cloud to create a work definition for an item that will be manufactured in-house?

Resources

Operations

Production line

Operation items

Manufacturing lead time

To create a work definition for an in-house manufactured item in Oracle Manufacturing Cloud, the following entities must be set up:
Resources: Resources such as machines, labor, or tools are required to define what is needed to execute each operation.
Operations: These represent the steps in the manufacturing process. Each operation can have multiple resources and associated work instructions.
Operation Items: These are the items consumed or used during the operation. They include the components and materials needed for production.
While Production Line (C) and Manufacturing Lead Time (E) are important for scheduling and capacity planning, they are not mandatory for creating a basic work definition.

Q24. Your client needs to implement operational checks for compliance with training and job requirements. Which four statements are true about this functionality?

A qualified operator need not be specified to report resource transactions.

You have the ability to associate a Job profile with a Work definition operation resource.

The qualification Is enforced during reporting of labor usage.

You have the ability to associate a Job profile with a Standard operation resource.

You do not have the ability to associate a Job profile with a Work order operation resource.

The qualification Is used to warn a production supervisor If they assign operators that don’t meet the skill requirements against the resource.

Oracle Manufacturing Cloud provides functionality to enforce compliance with training and job requirements through operational checks. The correct statements are:
Statement B: You can associate a job profile with a work definition operation resource. This ensures that only operators who meet the job requirements are allowed to perform the work.
Statement C: Qualifications are enforced when reporting labor usage, meaning that if an operator lacks the required qualifications, the system can prevent or warn about the labor transaction.
Statement D: You can also associate a job profile with a standard operation resource to enforce skills and training compliance.
Statement F: If an unqualified operator is assigned to a task, the system can notify the production supervisor to avoid non-compliance with skill requirements.
Incorrect options:
Statement A: A qualified operator must be specified to report resource transactions.
Statement E: You can associate a job profile with a work order operation resource, contrary to what is implied.

Q25. Which statement is NOT true about cumulative lead time?

It calculates cumulative manufacturing lead times by rolling up manufacturing lead times of make Items.

It updates the item’s lead time attributes at the end of the calculation process: cumulative manufacturing and cumulative total lead times.

It calculates cumulative total lead times by rolling up lead times of make items and adding up lead time values of buy items.

It updates lead time percent at the operation level in the work definition.

Cumulative lead time is a key concept in Oracle Manufacturing Cloud, where it calculates the total time required to manufacture an item. The following points clarify the calculations:
Statement D is incorrect because cumulative lead time does not update the lead time percent at the operation level in the work definition. Instead, cumulative lead time focuses on rolling up the lead times of both make and buy items to provide an overall lead time for the entire production process.
Correct Statements:
Statement A: The system calculates cumulative manufacturing lead time by summing up the lead times of all make items in the production process.
Statement B: At the end of the cumulative lead time calculation process, it updates the lead time attributes of the item, specifically cumulative manufacturing and cumulative total lead times.
Statement C: Cumulative total lead time includes both make and buy item lead times, representing the complete production cycle from procurement to manufacturing.

Q26. A manufacturing plant has two shifts of eight hours each for the work center WCI: day shift and night shift. You associate four units each of the resources R1, R2, R3, and R4 to WCI. The customer wants to assign ail units of R2 available for day and night shift.
What is the correct sequence of steps to achieve this?

Associate R2 with WC1 > Select the Available 24 Hours check box > Go to the Resource Availability region > Enter 4 in the Day Shift column > Enter 4 In the Night Shift column.

Associate R2 with WC1> Deselect the Available 24 Hours check box > Go to the Resource Availability region > Enter 4 in the Day Shift column > Enter 4 In the Night Shift column.

Associate R2 with WCI > Select the Available 24 Hours check box > Go to the Resource Availability region > Enter 2 in the Day Shift column > Enter 2 in the Night Shift column.

Associate R2 with WCI > Deselect the Available 24 Hours check box > Go to the Resource Availability region > Enter 2 In the Day Shift column > Enter 2 In the Night Shift column.

In Oracle Manufacturing Cloud, to assign all units of resource R2 across both day and night shifts for the work center WC1, follow these steps:
Associate R2 with WC1 – This step ensures that the resource R2 is linked to the work center.
Select the Available 24 Hours check box – By selecting this option, you indicate that the resource is available for both shifts across the full 24-hour period.
Enter 4 in the Day Shift and Night Shift columns – Inputting 4 units in both shifts ensures that all units of R2 are available for use during the entire day and night shifts.

Q27. Your customer runs two daily shifts in their plant: morning shift and evening shift. A resource, LATHE, is assigned to the work center W1. There are five units of LATHE available, of which three units are available for the morning shift and the remaining units for the evening shift.
Which two actions must the customer perform to associate LATHE with W1?

Deselect the Available 24 Hours check box and, in the Resource Availability region, enter 40% against LATHE In the Evening Shift column.

Deselect the Available 24 Hours check box and, in the Resource Availability region, enter ~z against LATHE in the Evening Shift column,

Deselect the Available 24 Hours check box and, in the Resource Availability region, enter 3 against LATHE in the Morning Shift column.

Select the Available 24 Hours check box and, in the Resource Availability region, enter 2 against LATHE in the Evening Shift column.

Select the Available 24 Hours check box and, in the Resource Availability region, enter 3 against LATHE In the Morning Shift column.

Deselect the Available 24 Hours check box and, in the Resource Availability region, enter 60% against LATHE in the Morning Shift column.

To allocate specific units of the LATHE resource to morning and evening shifts in Oracle Manufacturing Cloud, you need to configure the resource availability per shift as follows:
Deselect the Available 24 Hours check box – This ensures that the resource availability is limited to specific shifts instead of being available 24/7.
Enter 3 in the Morning Shift column – Assigning 3 units of LATHE to the morning shift allocates those units for use only during the morning.
Enter 2 in the Evening Shift column – Assigning 2 units to the evening shift ensures that the remaining LATHE units are available for the evening shift.

Q28. In a Manufacturing Cloud implementation, users are finding it difficult to track information about work orders executed across various work centers.
Which three information types in the Work Order Traveler can help users in this situation?

Reservation against sales orders

Hard pegging of items

Item on-hand quantity

Work definition details

Product serial Information

The Work Order Traveler in Oracle Manufacturing Cloud provides detailed information about work orders to help users track and manage work orders across various work centers. The following types of information are especially useful:
Work definition details (D): This provides detailed information about the operations and resources required to complete the work order, helping users understand the manufacturing process and requirements.
Product serial information (E): Tracking serial numbers for products is critical, especially in industries where traceability and product lifecycle management are important.
Reservation against sales orders (A): This information links work orders to specific sales orders, providing clarity on how the work order aligns with customer demand.
Incorrect options:
Hard pegging of items (B) and Item on-hand quantity (C) are not typically tracked through the Work Order Traveler report, as this report focuses more on the work order’s execution rather than inventory management.

Q29. You have been asked to set up cost estimates for 10 different purchased items. Which two tasks can you perform to achieve this?

Import a spreadsheet.

Call a web service.

Use the Mass Edit functionality.

Run the “Update Item Cost Estimate” ESS process.

Enter cost estimates directly into the UI.

To set up cost estimates for multiple purchased items in Oracle Manufacturing Cloud, the following tasks can be performed:
Import a spreadsheet (A): You can import cost estimates for multiple items at once using a preformatted spreadsheet, which allows for efficient data entry.
Enter cost estimates directly into the UI (E): Cost estimates can also be manually entered directly through the user interface for individual items, providing flexibility when fewer items need to be updated.
Incorrect options:
Calling a web service (B) is not the correct method for setting up cost estimates.
Mass Edit functionality (C) and Update Item Cost Estimate process (D) do not directly apply to entering new cost estimates for purchased items.

Q30. Which is NOT a required setup task for Manufacturing master data?

Manage Production Resources

Manage Plant Parameters

Manage Work Centers

Manage Work Areas

Manage Plant Profiles

In Oracle Manufacturing Cloud, setting up the Manufacturing master data involves a series of required tasks to enable production operations. The following are the key setups:
Manage Production Resources: This setup task is essential for defining resources such as labor, equipment, and tools that are used in the manufacturing process. Resources are vital to the production planning and scheduling functions.
Manage Plant Parameters: This task is required to define how the plant will operate in terms of material handling, scheduling, costing, and other key operational metrics. These parameters control important aspects of how manufacturing will function at the plant level.
Manage Work Centers: Work centers represent the physical or logical locations where manufacturing operations occur. They must be set up for scheduling and executing production activities.
Manage Work Areas: Work areas are required to group related work centers and define operational zones within a plant. This is important for organizing production and ensuring efficient material flow.
Manage Plant Profiles: This task is not required for setting up manufacturing master data. Plant profiles are typically used for broader plant-level settings but are not directly tied to the manufacturing execution setup.

Q31. The pick release of a project work order creates movement requests with the project and the task from the work order.
Which statement is NOT true about this?

The expenditure type, expenditure date, and expenditure organization are derived when the work-ln-process material issue or work-in-process material pick transactions are interfaced to Costing.

The expenditure type for the item is derived based on the Default Expenditure Type attribute in Inventory Management. The picks for the work order ore grouped by project costing, project, and task using pick slip grouping rules.

The expenditure type and the expenditure organization from the work order are referenced onto the shop floor movement requests.

The expenditure type and the expenditure organization from the work order are not referenced onto the shop floor movement requests.

When pick release creates movement requests for project-based work orders, there are several key points regarding expenditure information:
Statement D: The expenditure type and the expenditure organization from the work order are not referenced onto the shop floor movement requests – This statement is correct because the expenditure type and organization are not typically included in the shop floor movement requests. These requests focus more on the material movement aspects, while expenditure details are managed elsewhere in the system.
Incorrect Statements:
Statement A: The expenditure type, date, and organization are derived when interfacing with Costing, which ensures that project-related costs are tracked accurately.
Statement B: The expenditure type for the item is derived based on the default expenditure type in Inventory Management, which is true for how items are picked for a work order.
Statement C: Expenditure type and organization from the work order are referenced in costing, but not directly on movement requests.

Loading …

Verified 1Z0-1075-26 dumps Q&As – Pass Guarantee Exam Dumps Test Engine: https://www.latestcram.com/1Z0-1075-26-exam-cram-questions.html

Related Certifications

1z0-1067-22 (1)
1Z0-1042-25 (1)
1z0-1045-22 (1)
1Z0-909 (1)
1Z0-1058-21 (1)
1z0-1105-23 (1)
1z0-1093-21 (1)
1Z0-1061-26 (1)
1z1-149 (1)
1z0-1077-22 (1)

Free Cram & Latest Exams Dumps