[Apr 22, 2026] Latest LPIC Level1 101-500 Actual Free Exam Questions [Q109-Q127]

April 22, 2026 latestexam 0 Comments

5/5 - (1 vote)

[Apr 22, 2026] Latest LPIC Level1 101-500 Actual Free Exam Questions

LPIC Level1 101-500 Dumps Updated Practice Test and 299 unique questions

Exam Topics in Detail

Here’s an in-depth review of the test objectives for 101-500 exam:

System Architecture

Under this domain, candidates should understand how to configure hardware systems like mass storage devices. Also, they must be familiar with system booting and changing boot targets, and reboot or shut down the systems. In particular, candidates must know how to work with integrated peripherals, SysVinit and systemd, and BIOS. Also, you must focus on developing skills in SysVinit runlevel, switching it, and terminating it properly.

Q109. What is the effect on the grep command when the -v option is used?

It enables multi-line matching on the input.

It is a shortcut for the vgrep command.

It sets the verbose flag and increases the amount of information that is provided.

It inverts the matching to select non-matching lines.

Q110. When is the content of the kernel ring buffer reset? (Choose two.)

When the ring buffer is explicitly reset using the command dmesg –clear

When the ring buffer is read using dmesg without any additional parameters

When a configurable amount of time, 15 minutes by default, has passed

When the kernel loads a previously unloaded kernel module

When the system is shut down or rebooted

Q111. What does the command mount -a do?

It ensures that all file systems listed with the option noauto in /etc/fstab are mounted.

It shows all mounted file systems that have been automatically mounted.

It opens an editor with root privileges and loads /etc/fstab for editing.

It ensures that all file systems listed with the option auto in /etc/fstab are mounted.

It ensures that all file systems listed in /etc/fstab are mounted regardless of their options.

The command mount -a ensures that all file systems listed with the option auto in /etc/fstab are mounted. The
/etc/fstab file contains the information about the file systems that can be mounted automatically or manually.
The option auto means that the file system can be mounted automatically at boot time or when the command mount -a is issued. The option noauto means that the file system can only be mounted manually by specifying the device or mount point. The command mount -a ignores the file systems with the noauto option and mounts the rest of the file systems that are not already mounted. The other options are incorrect because they do not describe the correct behavior of the command mount -a. Option A is wrong because the command mount -a ignores the file systems with the noauto option. Option B is wrong because the command mount -a does not show any output, unless the -v option is used. To show the mounted file systems, the command mount without any arguments can be used. Option C is wrong because the command mount – a does not open any editor. To edit the /etc/fstab file, a text editor such as vi, nano, or gedit can be used.
Option E is wrong because the command mount -a does not mount all file systems listed in /etc/fstab, but only those with the auto option. References:
* [LPI Linux Essentials – 2.2 Mounting, Unmounting Filesystems]
* Linux mount Command with Examples – phoenixNAP
* How does the Linux command “mount -a” work? – Unix & Linux Stack Exchange
* mount command in Linux with Examples – GeeksforGeeks
* mount###############Linux######

Q112. Which of the following commands displays the output of the foo command on the screen and also writes it to a file called /tmp/foodata?

foo | less /tmp/foodata

foo | cp /tmp/foodata

foo > /tmp/foodata

foo | tee /tmp/foodata

foo > stdout >> /tmp/foodata

Q113. Which of the following commands lists the dependencies of the RPM package file foo.rpm?

rpm -qpR foo.rpm

rpm -dep foo

rpm -ld foo.rpm

rpm -R foo.rpm

rpm -pD foo

The command that lists the dependencies of the RPM package file foo.rpm is rpm -qpR foo.rpm. The rpm command is the low-level tool for managing RPM packages on Linux systems. The -q or –query option is used to query information about installed or uninstalled packages. The -p or –package option is used to specify a package file instead of an installed package name. The -R or –requires option is used to list the capabilities that the package requires. The capabilities are usually the names of other packages, libraries, or files that the package depends on. The rpm command is part of the 101.1 Determine and configure hardware settings topic of the LPI Linux Essentials certification program .
The other options are either invalid or do not perform the desired task. The rpm -dep foo command does not exist, as -dep is not a valid option for rpm. The rpm -ld foo.rpm command does not list the dependencies of the package file, but the files in the package. The rpm -R foo.rpm command does not list the dependencies of the package file, but the capabilities that the package provides. The rpm -pD foo command does not exist, as – pD is not a valid option for rpm. References:
* Linux Essentials – Linux Professional Institute Certification Programs
* Exam 101 Objectives – Linux Professional Institute
* rpm(8) – Linux manual page
* RPM Package Manager – Wikipedia

Q114. Which of the following commands prints a list of usernames (first column) and their primary group (fourth column) from the /etc/passwd file?

fmt -f 1,4 /etc/passwd

cut -d : -f 1,4 /etc/passwd

sort -t : -k 1,4 /etc/passwd

paste -f 1,4 /etc/passwd

split -c 1,4 /etc/passwd

Explanation
The command that prints a list of usernames (first column) and their primary group (fourth column) from the
/etc/passwd file is cut -d : -f 1,4 /etc/passwd. The cut command is used to extract selected fields or characters from each line of a file or standard input. The -d or –delimiter option specifies the character that separates the fields, which in this case is a colon (:). The -f or –fields option specifies the fields to be printed, which in this case are the first and the fourth fields. The /etc/passwd file is a text file that contains information about the user accounts on the system, such as the username, password, user ID, group ID, home directory, and login shell. The first column of the file is the username and the fourth column is the group ID, which corresponds to the primary group of the user. The cut command will print these two columns separated by a colon for each line of the file. For example, running cut -d : -f 1,4 /etc/passwd will produce an output like this:
root:0 daemon:1 bin:1 sys:3 sync:4 games:5 man:12 lp:7 mail:8 news:9 uucp:10 proxy:13 www-data:33 backup:34 list:38 irc:39 gnats:41 nobody:65534 systemd-network:100 systemd-resolve:101 syslog:102 messagebus:103 _apt:104 lxd:105 uuidd:106 dnsmasq:107 sshd:108 pollinate:109 vboxadd:999 ubuntu:1000 The other commands are either invalid or do not perform the desired task. The fmt command is used to reformat paragraphs of text, but it does not have a -f option. The sort command is used to sort lines of text, but it does not have a -t option. The paste command is used to merge lines of files, but it does not have a -f option.
The split command is used to split a file into pieces, but it does not have a -c option. References:
* Linux Essentials – Linux Professional Institute Certification Programs
* Exam 101 Objectives – Linux Professional Institute
* cut(1) – Linux manual page
* /etc/passwd file – Linux.com

Q115. Given the following user’s crontab entry:
15 14 * * 1-5 /usr/local/bin/example.sh
When will the script /usr/local/bin/example.sh be executed?

At 14:15 local time, January till May.

At 15:14 local time, 1st to 5th day of month.

At 14:15 local time, February till June.

At 14:15 local time, 1st to 5th day of month.

At 14:15 local time, Monday to Friday.

Q116. Which of the following are modes of the vi editor? (Choose two.)

edit mode

insert mode

change mode

review mode

command mode

Explanation
The modes of the vi editor that are correct are insert mode and command mode. The vi editor is a modal editor, which means that it has different modes for different operations. The insert mode allows the user to insert text into the file. The command mode allows the user to execute commands, such as saving, quitting,moving the cursor, searching, replacing, and so on. The user can switch between the modes by pressing certain keys, such as Esc, i, a, o, and others. The edit mode, change mode, and review mode are not valid modes of the vi editor.
References: LPI Exam 101 Detailed Objectives, Topic 103: GNU and Unix Commands, Weight: 25, Objective 103.8: Use vi to create and edit files, vi editor

Q117. Upon booting one of your Linux boxes, you notice a message scrolling by that does not look right, but it goes so fast, you do not have a chance to read it. What command could you use to view that message after the boot process completes?

dmesg

Q118. What is contained on the EFI System Partition?

The Linux root file system

The first stage boot loader

The default swap space file

The Linux default shell binaries

The user home directories

Q119. SIMULATION
Which command reads and displays the current contents of the Kernel Ring Buffer on the command line? (Specify ONLY the command without any path or parameters.)

dmesg

Q120. Identify the proper device for the third partition, on the second hard disk, on the first IDE controller on a PC system.

/dev/hdb3

/dev/hd1b3

/dev/hdc1b3

/dev/hdc1d2p3

Q121. What do the permissions -rwSr-xr-x mean for a binary file when it is executed as a command?

The command is SetUID and it will be executed with the effective rights of the owner.

The command will be executed with the effective rights of the group instead of the owner.

The execute flag is not set for the owner. Therefore, the SetUID flag is ignored.

The command will be executed with the effective rights of the owner and group.

The permissions -rwSr-xr-x mean that the file is readable and writable by the owner, readable and executable by the group, and readable and executable by others. The S in the owner’s permissions indicates that the file has the SetUID bit set, which means that when the file is executed as a command, it will run with the effective user ID of the file owner, rather than the user who executed it. This allows the command to perform privileged operations that the user normally cannot do. For example, the /bin/passwd command has the SetUID bit set, so that it can modify the /etc/shadow file, which is only writable by root. References: LPI Linux Administrator, File Permissions and Attributes

Q122. You want the default permissions for your files to be -rw-r—– . HOW must you set umask?

037

640

038

027

Q123. FILL BLANK
Which command displays the current disk space usage for all mounted file systems? (Specify ONLY the command without any path or parameters.)

Q124. Which of the following properties of a Linux system should be changed when a virtual machine is cloned?
(Choose two.)

The partitioning scheme

The file system

The D-Bus Machine ID

The permissions of /root/

The SSH host keys

Q125. If an alias Is exists, which of the following commands updates the ai as to point to dig contmfl nd is -1 instead of the alias’s current target?

set ls-‘ls -1″

alias ls=,ls -1′

alias –force ls=’ls -1*

alias –update Is ls=’ls -1′

realias Is-‘Is -1’

Q126. Which of the following commands enables the setuid (suid) permission on the executable /bin/foo?

chmod 1755 /bin/foo

chmod 4755 /bin/foo

chmod u-s /bin/foo

chmod 755+s /bin/foo

Q127. What command will generate a list of user names from /etc/passwd along with their login shell?

column -s : 1,7 /etc/passwd

chop -c 1,7 /etc/passwd

colrm 1,7 /etc/passwd

cut -d: -f1,7 /etc/passwd

The cut command is used to extract sections from each line of a file or input stream. The -d option specifies the delimiter that separates the fields in each line. The -f option specifies the fields to select. In this case, the delimiter is a colon (:) and the fields are 1 and 7. The first field is the user name and the seventh field is the login shell. Therefore, the cut command with these options will generate a list of user names and their login shells from /etc/passwd. References:
* Linux cut Command Explained with 6 Examples
* How to Use the Linux cut Command
* cut command in Linux with examples

Loading …

Lpi 101-500 certification exam is an excellent way for individuals to demonstrate their proficiency in Linux-based systems and applications. LPIC-1 Exam 101, Part 1 of 2, version 5.0 certification program is globally recognized and highly regarded in the IT industry. Passing the exam requires a thorough understanding of Linux concepts and command-line usage, which can be gained through study and practice. By achieving this certification, individuals can enhance their career prospects and demonstrate their expertise in Linux-based systems.

To be eligible to take the LPIC-1 Exam 101, Part 1 of 2, version 5.0, candidates should have basic knowledge of Linux operating systems, including command-line interface (CLI) usage and system administration tasks. It is recommended that candidates have at least six months of practical experience working with Linux systems before taking the exam.

Verified 101-500 dumps Q&As – 100% Pass from LatestCram: https://www.latestcram.com/101-500-exam-cram-questions.html

Related Certifications

CInP (1)

Free Cram & Latest Exams Dumps