Exam Questions Answers Braindumps VNX100 Exam Dumps PDF Questions [Q20-Q38]

May 29, 2024 latestexam 0 Comments

Rate this post

Exam Questions Answers Braindumps VNX100 Exam Dumps PDF Questions

Download Free Versa Networks VNX100 Real Exam Questions

Versa Networks VNX100 Certification Exam is designed for individuals who want to validate their skills and expertise in software-defined wide area networking (SD-WAN) technology. Versa Certified SD-WAN Associate certification exam focuses on Versa Networks’ VOS platform, which offers a comprehensive set of networking and security services to help organizations build and manage their SD-WAN infrastructure. By passing the VNX100 exam, professionals can demonstrate their ability to design, deploy, and maintain Versa Networks’ SD-WAN solutions, which are used by enterprises and service providers around the world.

NEW QUESTION 20
A group of users notified you that they are experiencing a network outage.
In this scenario, which two Versa components would you use to verify the live status of the WAN links?
(Choose two.)

Versa Director device monitoring dashboard

Versa Analytics SD-WAN dashboard

Versa Director troubleshooting tools

Versa Analytics sites availability dashboard

In the event of a network outage, to verify the live status of the WAN links, Versa Director device monitoring dashboard and Versa Analytics sites availability dashboard are the tools to use.These components provide real-time visibility into the status and health of WAN links, allowing for rapid identification and troubleshooting of connectivity issues.

NEW QUESTION 21
Which two methods are used to provision a Versa SD-WAN CPE? (Choose two.)

PXE boot provisioning

URL-based provisioning

Script-based provisioning

USB-based provisioning

NEW QUESTION 22
Yesterday, several users notified the network administrator that network performance was poor. However, today the users are not experiencing any network problems.
In this scenario, which Versa component would help identify the issue?

Versa Director troubleshooting tools

Versa Analytics dashboards

Versa Controller logs

Versa Director monitoring dashboards

NEW QUESTION 23
What are two node personalities in a Versa Analytics cluster? (Choose two.)

Controller

Analytics

Gateway

In a Versa Analytics cluster, the node personalities include Search and Analytics. These personalities reflect the different roles each node in the cluster plays. The Search nodes are responsible for ingesting and indexing data, enabling fast and efficient search operations, while the Analytics nodes are responsible for processing and analyzing data, providing insights and reports. This separation of duties is key to the operation of a Versa Analytics cluster, ensuring optimal performance and reliability of the analytics platform.

NEW QUESTION 24
Which two components are required when creating a device using workflows? (Choose two.)

Device Template

Common Template

Device Group

Service Template

When creating a device using workflows, two essential components are required: a Device Template and a Service Template. The Device Template is used to define the device’s characteristics and configuration details, whereas the Service Template contains service-specific configuration such as routing, security policies, and features that may be applied to the device. These templates are crucial for automating device provisioning and configuration within the Versa SD-WAN architecture.

NEW QUESTION 25
Which two statements about Versa Secure Access (VSA) are true? (Choose two.)

The VSA gateway is always hosted in a public cloud.

LDAP can be used to authenticate remote secure access users.

VSA supports multi-factor authentication.

The VSA client does not support split tunneling.

NEW QUESTION 26
Which statement about site discovery in a Versa Secure SD-WAN solution is true?

When a new site is provisioned, the administrator must add the new site information to existing site configurations.

When a new site is provisioned, Versa Director notifies existing sites of the newly added site.

When a new site is provisioned, Versa Controller reconfigures existing sites with the new site details.

When a new site is provisioned, existing sites auto-discover the new site using MP-BGP.

NEW QUESTION 27
Which three features are included in the Versa Operating System? (Choose three.)

HTTP Proxy

CDN

CGNAT

Multicast

NTP server

The Versa Operating System (VOSTM) includes a broad set of IP services. Specifically, it includes Carrier-Grade NAT (CG-NAT), which allows private network spaces to be mapped to public IP addresses; Multicast protocols such as IGMP and PIM (in Releases 20.2 and later); and the NTP server for time synchronization. HTTP Proxy and CDN are not listed among the included features for the Versa Operating System in the provided documents.

NEW QUESTION 28
In a Versa Secure SD-WAN solution, what are three functions of a hub controller? (Choose three.)

It does CPE lifecycle management.

It is a control plane node.

It is a data plane node.

It provides visibility and control.

It can be a staging server.

NEW QUESTION 29
A customer has a site activation planned using script-based provisioning; however, while unboxing the SD-WAN CPE, the engineer notices that the console cable is missing.
In this scenario, what would an engineer do to initiate the script-based provisioning?

Connect a laptop to any LAN port on the device.

Connect a laptop to any WAN port on the device.

Connect a laptop to the management port on the device.

Connect a laptop to the auxiliary port on the device.

NEW QUESTION 30
Which two statements about the Versa Secure SD-WAN head-end deployment are true? (Choose two.)

Versa Controller only supports a cloud-based installation.

Versa Analytics can be installed on-premises.

Versa Analytics only supports a cloud-based installation.

Versa Controller can be installed as a virtual machine.

NEW QUESTION 31
Review the exhibit.

Which set of conditions match the policy shown in the exhibit?

Traffic flows that meet any one of the following three conditions:
Source Zone – Intf-LAN1 Zone
Source Zone – Intf-WLAN-Zone
Application – SharePoint

Traffic flows that meet any of the following two conditions:
Source Zone – Intf-LAN1 Zone
Source Zone – Intf-WLAN-Zone
In addition, the below condition must also match
Application – SharePoint

Traffic flows that meet any one of the following three conditions:
Source Zone – Intf-LAN1 Zone
Source Zone – Intf-WLAN-Zone
Application – SharePoint

Traffic flows that meet all of the following two conditions:
Source Zone – Intf-LAN1 Zone
Source Zone – Intf-WLAN-Zone
In addition, the below condition must also match
Application – SharePoint

The policy shown in the exhibit appears to match traffic flows based on multiple conditions involving the source zone and the application. Given the information in the screenshot:
* The policy is configured with multiple zones as source zones:Intf-LAN1-ZoneandIntf-WLAN-Zone.
* An application is specified:SHAREPOINT.
The policy is likely to be applied to traffic originating from either of the specified zones and specifically related to the SharePoint application. This implies that both conditions related to the source zones are not mutually exclusive but rather a union; the same goes for the application condition.
Given this interpretation, the correct set of conditions that match the policy shown would be:
B:Traffic flows that meet any of the following two conditions:
* Source Zone – Intf-LAN1 Zone
* Source Zone – Intf-WLAN-Zone
In addition, the below condition must also match:
* Application – SharePoint
This means that traffic will match the policy if it comes from either theIntf-LAN1-Zoneor the Intf-WLAN-Zoneandis SharePoint application traffic.
However, to be more precise in the context of Versa SD-WAN configurations, it’s important to note that policies are usually applied when all conditions within a single rule are met. If the configuration in the screenshot intends to express that traffic is matched if it comes from either of the two zones and is for the SharePoint application, then the correct answer should reflect this logic. If the configuration system is set up to require all conditions in a rule to be met, then the answer could potentially be different. Since the user interface design can sometimes vary, it’s important to understand the specific logic of the system in question.

NEW QUESTION 32
Which two statements about Versa Analytics are true? (Choose two.)

Versa Analytics provides the ability to configure logging parameters on SD-WAN CPEs.

Versa Analytics provides REST APIs for northbound integration with third-party tools.

Versa Analytics provides centralized logging information about the SD-WAN environment.

Versa Analytics provides real-time traffic monitoring dashboards.

NEW QUESTION 33
Which two parts in the SD-WAN policy rules are used to steer traffic? (Choose two.)

Logging

Schedules

Applications

Anti-virus

NEW QUESTION 34
Your organization requires any new CPE deployment to have Versa Operating System version 20.2.2.
In this scenario, how would you accomplish this task?

Select preferred software version to 20.2.2 in the Common Template.

Select preferred software version to 20.2.2 in the Template Workflow.

Select preferred software version to 20.2.2 in the Device Bind Data.

Select preferred software version to 20.2.2 in the Device Group.

NEW QUESTION 35
Which statement about the function of an SD-WAN Forwarding Profile is true?

It defines the link-performance parameters.

It defines which of the WAN links should be selected to forward the outgoing traffic.

It defines the criteria for matching traffic.

It defines the criteria for custom applications and services.

An SD-WAN Forwarding Profile is a set of rules that determine how outgoing traffic should be handled within the SD-WAN network. It particularly defines which WAN links should be selected for forwarding the traffic based on certain criteria such as link performance, priority, and SLA compliance. The Forwarding Profile ensures that traffic is directed over the most appropriate link, which may involve decisions based on the link’s performance metrics like latency, jitter, or packet loss, ensuring efficient and optimal use of the WAN infrastructure.

NEW QUESTION 36
Your Versa CPE security policy rule is configured to generate and send logging information on policy hits using Default Logging Profile.
In this scenario, which Versa component would allow you to view the logs?

Versa Analytics

Versa Director

Versa Controller

Versa Secure Access Gateway

NEW QUESTION 37
An administrator tries to run a speed test from a branch’s Internet link to the Internet link of a remote site branch. However, the speed test fails.
In this scenario, what are two causes for the failure? (Choose two.)

The SLA path status between the branch sites over the Internet link is down.

The speed test module has not been activated.

The speed test server is not enabled on the remote site.

The speed test client is not enabled on the local site.

When a speed test fails, it could be due to the speed test module not being activated or the speed test server not being enabled at the remote site. If the speed test module has not been activated, the required functionality to conduct the test will not be operational. Similarly, if the remote site does not have the speed test server enabled, it won’t respond to speed test requests. Issues with the SLA path status or client configuration might be relevant to the performance and reachability but are not cited as direct reasons for a speed test failure within the documentation provided.

NEW QUESTION 38
Which two statements about Versa Secure Access (VSA) are true? (Choose two.)

The VSA gateway is always hosted in a public cloud.

LDAP can be used to authenticate remote secure access users.

VSA supports multi-factor authentication.

The VSA client does not support split tunneling.

Versa Secure Access (VSA) is designed to integrate with various authentication servers, including LDAP, and supports multifactor authentication methods like email and time-based OTP, integrating with authentication applications such as Duo, Google Authenticator, and Microsoft Authenticator. This makes the platform versatile in terms of supporting different enterpriserequirements for user authentication and enhancing security.

Loading …

Versa Networks VNX100 (Versa Certified SD-WAN Associate) Certification Exam is designed to help IT professionals achieve a fundamental understanding of SD-WAN technology and its applications. Versa Certified SD-WAN Associate certification is perfect for individuals who are new to the field of SD-WAN or looking to improve their existing knowledge of the technology. The VNX100 certification exam provides a comprehensive overview of SD-WAN technology, the concepts behind it, and how to implement it in various network environments.

Latest Versa Networks VNX100 Real Exam Dumps PDF: https://www.latestcram.com/VNX100-exam-cram-questions.html

Related Certifications

C-SAC-2415 (1)
C-TS422-2021 (1)
C-TS411-2021 (1)
C-SACP-2308 (1)
C-THR96-2205 (1)
C-TB1200-10 (1)
P-C4H340-34 (1)
C_THR84_2211 (1)
C_ACTIVATE13 (1)
C_THR95_2205 (1)

Free Cram & Latest Exams Dumps

Exam Questions Answers Braindumps VNX100 Exam Dumps PDF Questions [Q20-Q38]

leave a comment Cancel reply

Related Certifications

Recent Posts

Archives

Categories