[Q65-Q82] Certification Training for Professional-Cloud-Network-Engineer Exam Dumps Test Engine [2024]

[Q65-Q82] Certification Training for Professional-Cloud-Network-Engineer Exam Dumps Test Engine [2024]

February 25, 2024 latestexam 0 Comments

Rate this post

Certification Training for Professional-Cloud-Network-Engineer Exam Dumps Test Engine [2024]

Feb 25, 2024 Step by Step Guide to Prepare for Professional-Cloud-Network-Engineer Exam

Google Professional-Cloud-Network-Engineer Exam is a valuable certification for network professionals who want to demonstrate their skills in deploying, managing, and ensuring the reliability of network infrastructure on the Google Cloud Platform. Professional-Cloud-Network-Engineer exam covers a wide range of topics, including network design, network security, network optimization, and network management. Passing Professional-Cloud-Network-Engineer exam requires a thorough understanding of the Google Cloud Platform networking environment and its associated tools. If you are looking to enhance your career prospects and increase your earning potential, Professional-Cloud-Network-Engineer exam is a must-have.

NO.65 You have created a firewall with rules that only allow traffic over HTTP, HTTPS, and SSH ports. While testing, you specifically try to reach the server over multiple ports and protocols; however, you do not see any denied connections in the firewall logs. You want to resolve the issue.
What should you do?

Enable logging on the default Deny Any Firewall Rule.

Enable logging on the VM Instances that receive traffic.

Create a logging sink forwarding all firewall logs with no filters.

Create an explicit Deny Any rule and enable logging on the new rule.

https://cloud.google.com/vpc/docs/firewall-rules-logging#egress_deny_example You can only enable Firewall Rules Logging for rules in a Virtual Private Cloud (VPC) network. Legacy networks are not supported. Firewall Rules Logging only records TCP and UDP connections. Although you can create a firewall rule applicable to other protocols, you cannot log their connections. You cannot enable Firewall Rules Logging for the implied deny ingress and implied allow egress rules. Log entries are written from the perspective of virtual machine (VM) instances. Log entries are only created if a firewall rule has logging enabled and if the rule applies to traffic sent to or from the VM. Entries are created according to the connection logging limits on a best effort basis. The number of connections that can be logged in a given interval is based on the machine type. Changes to firewall rules can be viewed in VPC audit logs. https://cloud.google.com/vpc/docs/firewall-rules-logging#specifications

NO.66 You have a Cloud Storage bucket in Google Cloud project XYZ. The bucket contains sensitive dat a. You need to design a solution to ensure that only instances belonging to VPCs under project XYZ can access the data stored in this Cloud Storage bucket. What should you do?

Configure Private Google Access to privately access the Cloud Storage service using private IP addresses.

Configure a VPC Service Controls perimeter around project XYZ, and include storage.googleapis.com as a restricted service in the service perimeter.

Configure Cloud Storage with projectPrivate Access Control List (ACL) that gives permission to the project team based on their roles.

Configure Private Service Connect to privately access Cloud Storage from all VPCs under project XYZ.

NO.67 You need to give each member of your network operations team least-privilege access to create, modify, and delete Cloud Interconnect VLAN attachments.
What should you do?

Assign each user the editor role.

Assign each user the compute.networkAdmin role.

Give each user the following permissions only: compute.interconnectAttachments.create, compute.interconnectAttachments.get.

Give each user the following permissions only: compute.interconnectAttachments.create, compute.interconnectAttachments.get, compute.routers.create, compute.routers.get, compute.routers.update.

https://cloud.google.com/interconnect/docs/how-to/dedicated/creating-vlan-attachments

NO.68 You created a new VPC for your development team. You want to allow access to the resources in this VPC via SSH only.
How should you configure your firewall rules?

Create two firewall rules: one to block all traffic with priority 0, and another to allow port 22 with priority 1000.

Create two firewall rules: one to block all traffic with priority 65536, and another to allow port 3389 with priority 1000.

Create a single firewall rule to allow port 22 with priority 1000.

Create a single firewall rule to allow port 3389 with priority 1000.

Reference:
https://geekflare.com/gcp-firewall-configuration/

NO.69 You want to apply a new Cloud Armor policy to an application that is deployed in Google Kubernetes Engine (GKE). You want to find out which target to use for your Cloud Armor policy.
Which GKE resource should you use?

GKE Node

GKE Pod

GKE Cluster

GKE Ingress

NO.70 You create a Google Kubernetes Engine private cluster and want to use kubectl to get the status of the pods.
In one of your instances you notice the master is not responding, even though the cluster is up and running.
What should you do to solve the problem?

Assign a public IP address to the instance.

Create a route to reach the Master, pointing to the default internet gateway.

Create the appropriate firewall policy in the VPC to allow traffic from Master node IP address to the instance.

Create the appropriate master authorized network entries to allow the instance to communicate to the master.

NO.71 You are designing a Google Kubernetes Engine (GKE) cluster for your organization. The current cluster size is expected to host 10 nodes, with 20 Pods per node and 150 services. Because of the migration of new services over the next 2 years, there is a planned growth for 100 nodes, 200 Pods per node, and 1500 services. You want to use VPC-native clusters with alias IP ranges, while minimizing address consumption.
How should you design this topology?

Create a subnet of size/25 with 2 secondary ranges of: /17 for Pods and /21 for Services. Create a VPC-native cluster and specify those ranges.

Create a subnet of size/28 with 2 secondary ranges of: /24 for Pods and /24 for Services. Create a VPC-native cluster and specify those ranges. When the services are ready to be deployed, resize the subnets.

Use gcloud container clusters create [CLUSTER NAME]–enable-ip-alias to create a VPC-native cluster.

Use gcloud container clusters create [CLUSTER NAME] to create a VPC-native cluster.

NO.72 You created a new VPC for your development team. You want to allow access to the resources in this VPC via SSH only.
How should you configure your firewall rules?

Create two firewall rules: one to block all traffic with priority 0, and another to allow port 22 with priority
1000.

Create two firewall rules: one to block all traffic with priority 65536, and another to allow port 3389 with priority 1000.

Create a single firewall rule to allow port 22 with priority 1000.

Create a single firewall rule to allow port 3389 with priority 1000.

Explanation/Reference: https://geekflare.com/gcp-firewall-configuration/

NO.73 Datachamps is an organization resource and it has many projects under it .The company uses BigQuery for data analysis. They want a user named admin-bigquery to be the admin for all BigQuery data across all of the projects under the Datachamps organization . Monitorbigquery is a service account that’s responsible for monitoring the size of all the tables across all projects in the Datachamps organization. What predefined roles must be given to admin-bigquery (user) and Monitorbigquery (service account) .

bigquery.user to admin-bigquery and bigquery.dataViewer to Monitorbigquery service

bigquery.admin to admin-bigquery and bigquery.dataViewer to Monitorbigquery service account.

bigquery.admin to admin-bigquery and bigquery.dataOwner to Monitorbigquery service account.

bigquery.connectionAdmin to admin-bigquery and bigquery.dataEditor to Monitoringbigquery service account .

Option B is the Correct choice because, On organization Datachamps add admin-bigquery to the predefined role bigquery.admin this provides permissions to manage all resources across the project and manage all data across the project, and can cancel jobs from other users running across the project.. Add Monitorbigquery to the predefined role bigquery.dataViewer ,when applied at the project or organization level, this role can also enumerate all datasets in the project and this the appropriate role to fulfil the objective of monitoring tables across all projects .

NO.74 You want to deploy a VPN Gateway to connect your on-premises network to GCP. You are using a non BGP-capable on-premises VPN device. You want to minimize downtime and operational overhead when your network grows. The device supports only IKEv2, and you want to follow Google-recommended practices.
What should you do?

Create a Cloud VPN instance.
Create a policy-based VPN tunnel per subnet.
Configure the appropriate local and remote traffic selectors to match your local and remote networks.
Create the appropriate static routes.

Create a Cloud VPN instance.
Create a policy-based VPN tunnel.
Configure the appropriate local and remote traffic selectors to match your local and remote networks.
Configure the appropriate static routes.

Create a Cloud VPN instance.
Create a route-based VPN tunnel.
Configure the appropriate local and remote traffic selectors to match your local and remote networks.
Configure the appropriate static routes.

Create a Cloud VPN instance.
Create a route-based VPN tunnel.
Configure the appropriate local and remote traffic selectors to 0.0.0.0/0.
Configure the appropriate static routes.

https://cloud.google.com/vpn/docs/concepts/choosing-networks-routing

NO.75 Your end users are located in close proximity to us-east1 and europe-west1. Their workloads need to communicate with each other. You want to minimize cost and increase network efficiency.
How should you design this topology?

Create 2 VPCs, each with their own regions and individual subnets.
Create 2 VPN gateways to establish connectivity between these regions.

Create 2 VPCs, each with their own region and individual subnets.
Use external IP addresses on the instances to establish connectivity between these regions.

Create 1 VPC with 2 regional subnets.
Create a global load balancer to establish connectivity between the regions.

Create 1 VPC with 2 regional subnets.
Deploy workloads in these subnets and have them communicate using private RFC1918 IP addresses.

VPC Network Peering enables you to peer VPC networks so that workloads in different VPC networks can communicate in private RFC 1918 space. Traffic stays within Google’s network and doesn’t traverse the public internet.
https://cloud.google.com/vpc/docs/vpc-peering

NO.76 You are using a 10-Gbps direct peering connection to Google together with the gsutil tool to upload files to Cloud Storage buckets from on-premises servers. The on-premises servers are 100 milliseconds away from the Google peering point. You notice that your uploads are not using the full 10-Gbps bandwidth available to you. You want to optimize the bandwidth utilization of the connection.
What should you do on your on-premises servers?

Tune TCP parameters on the on-premises servers.

Remove the -m flag from the gsutil command to enable single-threaded transfers.

Compress files using utilities like tar to reduce the size of data being sent.

Use the perfdiag parameter in your gsutil command to enable faster performance: gsutil perfdiag gs://[BUCKET NAME].

NO.77 You are configuring load balancing for a standard three-tier (web, application, and database) application. You have configured an external HTTP(S) load balancer for the web servers. You need to configure load balancing for the application tier of servers. What should you do?

Configure a forwarding rule on the existing load balancer for the application tier.

Configure equal cost multi-path routing on the application servers.

Configure a new internal HTTP(S) load balancer for the application tier.

Configure a URL map on the existing load balancer to route traffic to the application tier.

NO.78 Your company offers a popular gaming service. Your instances are deployed with private IP addresses, and external access is granted through a global load balancer. You have recently engaged a traffic-scrubbing service and want to restrict your origin to allow connections only from the traffic-scrubbing service.
What should you do?

Create a Cloud Armor Security Policy that blocks all traffic except for the traffic-scrubbing service.

Create a VPC Firewall rule that blocks all traffic except for the traffic-scrubbing service.

Create a VPC Service Control Perimeter that blocks all traffic except for the traffic-scrubbing service.

Create IPTables firewall rules that block all traffic except for the traffic-scrubbing service.

NO.79 You work for a university that is migrating to GCP.
These are the cloud requirements:
* On-premises connectivity with 10 Gbps
* Lowest latency access to the cloud
* Centralized Networking Administration Team
New departments are asking for on-premises connectivity to their projects. You want to deploy the most cost- efficient interconnect solution for connecting the campus to Google Cloud.
What should you do?

Use Shared VPC, and deploy the VLAN attachments and Interconnect in the host project.

Use Shared VPC, and deploy the VLAN attachments in the service projects. Connect the VLAN attachment to the Shared VPC’s host project.

Use standalone projects, and deploy the VLAN attachments in the individual projects. Connect the VLAN attachment to the standalone projects’ Interconnects.

Use standalone projects and deploy the VLAN attachments and Interconnects in each of the individual projects.

NO.80 You are designing a Google Kubernetes Engine (GKE) cluster for your organization. The current cluster size is expected to host 10 nodes, with 20 Pods per node and 150 services. Because of the migration of new services over the next 2 years, there is a planned growth for 100 nodes, 200 Pods per node, and 1500 services. You want to use VPC-native clusters with alias IP ranges, while minimizing address consumption.
How should you design this topology?

Create a subnet of size/25 with 2 secondary ranges of: /17 for Pods and /21 for Services. Create a VPC-native cluster and specify those ranges.

Use gcloud container clusters create [CLUSTER NAME]–enable-ip-alias to create a VPC-native cluster.

Use gcloud container clusters create [CLUSTER NAME] to create a VPC-native cluster.

The service range setting is permanent and cannot be changed. Please see https://stackoverflow.com/questions/60957040/how-to-increase-the-service-address-range-of-a-gke-cluster I think the correc tanswer is A since: Grow is expected to up to 100 nodes (that would be /25), then up to 200 pods per node (100 times 200 = 20000 so /17 is 32768), then 1500 services in a /21 (up to 2048)
https://docs.netgate.com/pfsense/en/latest/book/network/understanding-cidr-subnet-mask-notation.html

NO.81 You are using a third-party next-generation firewall to inspect traffic. You created a custom route of 0.0.0.0/0 to route egress traffic to the firewall. You want to allow your VPC instances without public IP addresses to access the BigQuery and Cloud Pub/Sub APIs, without sending the traffic through the firewall.
Which two actions should you take? (Choose two.)

Turn on Private Google Access at the subnet level.

Turn on Private Google Access at the VPC level.

Turn on Private Services Access at the VPC level.

Create a set of custom static routes to send traffic to the external IP addresses of Google APIs and services via the default internet gateway.

Create a set of custom static routes to send traffic to the internal IP addresses of Google APIs and services via the default internet gateway.

NO.82 You need to create a GKE cluster in an existing VPC that is accessible from on-premises. You must meet the following requirements:
* IP ranges for pods and services must be as small as possible.
* The nodes and the master must not be reachable from the internet.
* You must be able to use kubectl commands from on-premises subnets to manage the cluster.
How should you create the GKE cluster?

* Create a private cluster that uses VPC advanced routes.
* Set the pod and service ranges as /24.
* Set up a network proxy to access the master.

* Create a VPC-native GKE cluster using GKE-managed IP ranges.
* Set the pod IP range as /21 and service IP range as /24.
* Set up a network proxy to access the master.

* Create a VPC-native GKE cluster using user-managed IP ranges.
* Enable a GKE cluster network policy, set the pod and service ranges as /24.
* Set up a network proxy to access the master.
* Enable master authorized networks.

* Create a VPC-native GKE cluster using user-managed IP ranges.
* Enable privateEndpoint on the cluster master.
* Set the pod and service ranges as /24.
* Set up a network proxy to access the master.
* Enable master authorized networks.

Explanation/Reference: https://cloud.google.com/kubernetes-engine/docs/how-to/alias-ips

Loading …

Ultimate Guide to Prepare Professional-Cloud-Network-Engineer Certification Exam for Google Cloud Platform: https://www.latestcram.com/Professional-Cloud-Network-Engineer-exam-cram-questions.html

Related Certifications

C_S4CS_2202 (1)
C-S4CPS-2208 (1)
C-C4H450-21 (1)
C_HANAIMP_18 (1)
C_ARP2P_2202 (1)
C_SEN_2011 (1)
C-SACP-2308 (1)
C_ARCIG_2208 (2)
C-ARCIG-2302 (2)
C_THR82_2205 (1)

Free Cram & Latest Exams Dumps

[Q65-Q82] Certification Training for Professional-Cloud-Network-Engineer Exam Dumps Test Engine [2024]

leave a comment Cancel reply

Related Certifications

Recent Posts

Archives

Categories