H35-480_V3.0 Actual Questions - Instant Download 60 Questions [Q28-Q52]

H35-480_V3.0 Actual Questions – Instant Download 60 Questions [Q28-Q52]

December 24, 2023 latestexam 0 Comments

Rate this post

H35-480_V3.0 Actual Questions – Instant Download 60 Questions

Download Free Latest Exam H35-480_V3.0 Certified Sample Questions

Huawei H35-480_V3.0 exam is based on the latest 5G RAN technologies and is designed to test the knowledge and skills of candidates in a real-world scenario. H35-480_V3.0 exam consists of multiple-choice questions and simulations that require candidates to demonstrate their ability to apply their knowledge to solve practical problems. H35-480_V3.0 exam is conducted online and can be taken at any time, making it convenient for candidates to schedule the exam according to their availability.

Huawei H35-480_V3.0 (HCIA-5G-RAN V3.0) Certification Exam is suitable for individuals who are looking to enhance their careers in the telecommunications industry. HCIA-5G-RAN V3.0 certification exam is open to professionals who have a basic understanding of 5G technologies and have experience working with 5G-RAN networks. HCIA-5G-RAN V3.0 certification exam is also suitable for professionals who want to upgrade their existing skills and knowledge in 5G-RAN technologies.

Q28. SSB GSCN is the center frequency number of an NR cell.

True

False

SSB GSCN is the center frequency number of an NR cell. SSB GSCN stands for “SS block group-specific cell number” and is used to identify the center frequency of an NR cell. This value is used in combination with the operating bandwidth of the cell to determine the physical layer resource grid for the cell. As such, it is important for the correct SSB GSCN to be configured for the cell in order to ensure the correct channel coding.
https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/powerpoint_presentation_-_making_5g_nr_a_reality_february_2020_web.pdf Making 5G NR a Commercial Reality A unified, more capable 5G air …
https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/powerpoint_presentation_-_making_5g_nr_a_reality_february_2020_web.pdf
https://www.gtigroup.org/d/file/Resources/rep/2019-07-05/cbf7810256b4c312c460863fcb77bd58.pdf GTI 5G Device Power Consumption White Paper
https://www.gtigroup.org/d/file/Resources/rep/2019-07-05/cbf7810256b4c312c460863fcb77bd58.pdf In 5G NR, the SSB (Secondary Synchronization Signal Block) is used to provide the time and frequency synchronization information to the mobile devices. It is transmitted in the frequency domain and it consists of two parts: the SSB GSCN (Secondary Synchronization Signal Block – Group and Sequence Number) and the SSB MIB (Secondary Synchronization Signal Block – Master Information Block).
The SSB GSCN is a unique identifier that indicates the center frequency number of the cell. It is used to identify the cell and to determine the frequency offset of the cell with respect to the carrier frequency.
So, the statement is true, SSB GSCN is the center frequency number of an NR cell. It’s worth noting that the SSB MIB contains other system information such as the system bandwidth, the transmission bandwidth configuration, and the number of symbols in a slot.

Q29. An NR CQI value represents a coding scheme and coding efficiency. How many bits does a CQI value reported by a UE have?

Q30. What are the typical sizes of ping packets and intervals in single site verification? (Choose All that Apply)

1500 bytes, 2s

1500 bytes, 1s

32 bytes, 1s

32 bytes, 2s

-“In single site verification, the typical ping packet size is 32 bytes and 1500 bytes, the typical interval is 1s.” in Huawei official website.

Q31. After the NR base station commissioning is complete and before services go online, which of the following must be set for the NE status?

Normal

New

Upgrade

Testing

According to the Huawei SA Networking Product Design Guide (https://www.huawei.com/en/doc/e_huaweidoc/pdf/HW_051525), after the NR base station commissioning is complete and before services go online, the NE status must be set to ‘Normal’.

Q32. In what scenarios is GENEX Assistant typically applied? (Choose All that Apply)

Wireless network adjustment

Single site verification

Batch processing of gNodeB alarms

Routine network optimization

According to Huawei’s official documentation, GENEX Assistant is typically applied in the following scenarios:
Wireless network adjustment
Single site verification
Routine network optimization

Q33. According to 3GPP specifications, which of the following is not an RRC state in 5G?

RRC_IDLE

RRC_ACTIVE

RRC_CONNECTED

RRC_INACTIVE

According to 3GPP specifications, the RRC states in 5G are RRCIDLE, RRCACTIVE, and RRCCONNECTED. RRCINACTIVE is not an RRC state defined in 3GPP specifications. RRCIDLE is the state when the UE is not attached to an eNB and is not actively monitoring for paging. RRCACTIVE is the state when the UE is attached to an eNB and is actively monitoring for paging. RRCCONNECTED is the state when the UE has an established RRC connection with an eNB.
The RRC is a protocol that controls the radio resources of the mobile device in a cellular network. 3GPP (3rd Generation Partnership Project) has defined several RRC states for 5G NR (New Radio) to manage the radio resources of the mobile device. These states are:
1. RRC_IDLE: The mobile device is not connected to any cell and is not actively searching for a cell to connect to. B. RRC_ACTIVE: The mobile device is connected to a cell and is actively communicating with it. C. RRC_CONNECTED: The mobile device is connected to a cell, but it’s not actively communicating with it. It is in a low power state and is only listening to the paging channel for incoming calls or data.
So, the correct answer is D. RRC_INACTIVE, is not an RRC state in 5G according to 3GPP specifications. It’s worth noting that the RRC state of the mobile device can change dynamically based on the network conditions, service requirements, and the mobile device’s power management.

Q34. Which of the following factors trigger measurement in connected mode in SA networking? (Choose All that Apply)

Periodic TAU

Whether or not the UE is moving

Whether or not neighboring frequencies are configured

Signal quality of the serving cell

Q35. Which type of information about NR cells is carried in the neighboring NR cell MRs reported by UEs? (Choose all that Apply)

RSRP

MACCE

PCI

1. RSRP (Reference Signal Received Power) is the power level of the reference signals received from the cell, it is used to measure the strength of the signal from the cell, and it is an important parameter for cell selection and handover decisions. C. PCI (Physical Cell Identity) is a unique identifier assigned to each cell in the network, it is used to identify the cell and its system information.

Q36. E2E network device update is required for the evolution from 5G NSA networking to SA networking.

True

False

End-to-end (E2E) network device update is required for the evolution from 5G Non-Stand-Alone (NSA) networking to Stand-Alone (SA) networking. In 5G NSA networking, the control plane functions are handled by the 4G LTE network, while the user plane functions are handled by the 5G NR network. In contrast, in 5G SA networking, the control plane and user plane functions are handled by the 5G NR network alone. So, to evolve from 5G NSA to 5G SA, all the network devices including Radio Access Network (RAN), Core Network (CN) and Transport Network (TN) need to be updated with 5G SA capable software and hardware.
It is important to note that 5G SA provides more flexibility, control and autonomy for network operation and management, However, it also requires a higher level of complexity and more resources to operate.

Q37. Which of the following NR channels or signals supports static and dynamic power control?

PDCCH

PUSCH

PBCH

Static power control is used to adjust the transmission power of UEs to meet the requirements of cell-edge UEs, while dynamic power control is used to adjust the transmission power of UEs to meet the requirements of the uplink channel quality. PUSCH is the channel used by the UE to transmit data to the gNodeB and supports both static and dynamic power control.
Reference:
“The PUSCH (Physical Uplink Shared Channel) supports both static and dynamic power control. Static power control is used to adjust the transmission power of UEs to meet the requirements of cell-edge UEs, while dynamic power control is used to adjust the transmission power of UEs to meet the requirements of the uplink channel quality.” in Huawei official website.

Q38. What are the typical sizes of ping packets and intervals in single site verification?

1500bytes, 2s

1500 bytes,1s

32 bytes,1s

32 bytes, 2s

Q39. 5G inherits the frame structure of 4G, but the slot length can be adjusted based on different SCSs. Which of the following is not a 5G slot length?

0.5ms

10ms

0.25ms

1ms

Q40. Which of the following channels (signals) can be used for cell measurement in NR?

DM-RS

CSI-RS

PT-RS

SSB

1. DM-RS (Demodulation Reference Signals) are transmitted in the frequency domain, they are used to demodulate the downlink data and control channels, and they can be used for cell measurement such as cell identification, cell reselection, and handover. B. CSI-RS (Channel State Information Reference Signals) are also transmitted in the frequency domain, they are used to provide channel state information for downlink data and control channels, and they can be used for cell measurement such as link adaptation, beamforming and interference management.
DM-RS stands for Demodulation Reference Signal and is used for channel estimation in the frequency domain. CSI-RS stands for Channel State Information Reference Signal and is used for channel estimation in the time-frequency domain. PT-RS and SSB are not channels (signals) that can be used for cell measurement in NR.

Q41. If the length of the CPRI optical fiber between a BBU and an RRU exceeds 150 m, you are advised to use a multimode fiber.

True

False

The Common Public Radio Interface (CPRI) is a standard that defines the interface between the BBU (baseband unit) and the RRU (remote radio unit) in a wireless base station. The BBU and the RRU are connected by an optical fiber cable, known as the CPRI optical fiber.
The CPRI optical fiber is used to transport the digital baseband signals between the BBU and the RRU. The distance between the BBU and the RRU can be up to several kilometers, but the standard CPRI specification only supports a maximum distance of 150m between the BBU and RRU using single-mode fiber. If the distance exceeds 150m, multimode fiber should be used to extend the distance between the BBU and the RRU.

Q42. Which of the following actions are involved in NAS procedure management in 5G?

Registration management

RRC reestablishment

Session management

RRC connection setup

Explanation
https://www.techplayon.com/5g-nas-mobility-management-5gmm/

Q43. In what scenarios is GENEX Assistant typically applied?

Wireless network adjustment

Single site verification

Batch processing of gNodeB alarms

Routine network optimization

Q44. In NSA networking, which of the following commands can be used to check whether the Sl-U interface is normal?

DSP S1INTERFACE

DSP SCTPLNK

DSP IPPATH

DSP GTPUECHO

Q45. A larger CQI value indicates a better channel quality.

True

False

CQI (channel quality indicator) is a value that represents the channel quality of the wireless link between a UE (user equipment) and an eNodeB (base station) in an NR (New Radio) network. The UE reports the CQI value to the eNodeB, which uses it to determine the optimal coding scheme and modulation for the downlink transmissions to that UE.
A larger CQI value indicates better channel quality, higher link quality and a better signal-to-noise ratio. When the channel quality is good, the UE can report a larger CQI value, and the eNodeB can use a higher modulation and coding scheme to achieve higher data rate and better performance. On the other hand, when the channel quality is poor, the UE will report a smaller CQI value, and the eNodeB will use a lower modulation and coding scheme to reduce the error rate. It’s worth noting that, the exact range of CQI values and the specific mapping between CQI values and modulation/coding schemes may vary depending on the specific network deployment, it’s always recommended to refer to the official guide or document of the product for detailed and accurate information.

Q46. According to 3GPP specifications, which of the following is not an RRC state in 5G?

RRC_IDLE

RRC_ACTIVE

RRC_CONNECTED

RRC_INACTIVE

Explanation
https://devopedia.org/5g-ue-rrc-states

Q47. Which of the following NR channels or signals supports static and dynamic power control?

PDCCH

PUSCH

PBCH

Q48. Which of the following devices is used to implement service slicing on the 5G RAN side?

Antenna

BBU

AAU

RRU

On the 5G RAN side, Service Slicing is implemented using a Base Band Unit (BBU). A BBU is a device that performs baseband processing functions, such as modulation, demodulation, and encoding/decoding of signals. It is also responsible for the connection to the core network and the management of the radio resources. In 5G, BBU is a key component to support service slicing, where different services can be assigned different slices of the network resources, such as bandwidth, power, and quality of service. This allows for more efficient use of resources and better management of different types of traffic, such as broadband and low latency services.

Q49. In SA networking, the mobile country code (MCC) and mobile network code (MNC) information added on the gNodeB must be consistent with the PLMN information on the core network.

True

False

“The Mobile Country Code (MCC) and Mobile Network Code (MNC) information added on the gNodeB must be consistent with the PLMN information on the core network.”

Q50. Which of the following is the correct sequence for adding gNodeB hardware?

RF unit -> Subrack -> Board -> Cabinet

Board -> Cabinet -> Subrack -> RF unit

Cabinet -> Subrack -> Board -> RF unit

Subrack -> Board -> Cabinet -> RF unit

Q51. Which of the following devices is used to implement service slicing on the 5G RAN side?

Antenna

BBU

AAU

RRU

Q52. At which layer is downlink data split implemented over the NR air interface in the NSA Option 3x architecture?

RLC layer

MAC layer

PDCP layer

Physical layer

Downlink data split over the NR air interface in the NSA Option 3x architecture is implemented at the medium access control (MAC) layer. The MAC layer is responsible for the management of data transmission over the air interface, including segmentation and reassembly of data packets, scheduling of transmission resources, and error correction. The other layers (RLC, PDCP, and physical) are not involved in the implementation of downlink data split.
https://ec.europa.eu/research/participants/documents/downloadPublic?documentIds=080166e5a964aa85&appId=PPGMS Preliminary results for multi-service support in link solution adaptation
https://ec.europa.eu/research/participants/documents/downloadPublic?documentIds=080166e5a964aa85&appId=PPGMS
https://ieeexplore.ieee.org/iel7/6287639/8948470/08998153.pdf
3GPP NR Sidelink Transmissions Toward 5G V2X
https://ieeexplore.ieee.org/iel7/6287639/8948470/08998153.pdf
https://www.3gpp.org/ftp/Inbox/Marcoms/ICT_6_1-2.pdf
journal of ict standardization – 3gpp
https://www.3gpp.org/ftp/Inbox/Marcoms/ICT_6_1-2.pdf
In the Non-Stand-Alone (NSA) Option 3x architecture, the control plane functions are handled by the 4G LTE network (EPC), while the user plane functions are handled by the 5G NR network. Data split is a technique that allows to split the user plane data between the 4G LTE and 5G NR networks.
The MAC (Medium Access Control) layer is responsible for controlling the access to the shared wireless medium, and it is where the downlink data split is implemented. In this architecture, the MAC layer in the 5G NR network receives the downlink data from the 4G LTE network and sends it to the physical layer for transmission.

Loading …

Free Huawei H35-480_V3.0 Exam 2023 Practice Materials Collection: https://www.latestcram.com/H35-480_V3.0-exam-cram-questions.html

Related Certifications

C-SACP-2308 (1)
C-THR96-2305 (1)
C_TS462_2020 (1)
C_THR86_2111 (1)
E-S4CPE-2023 (1)
C_CPE_16 (1)
C_SEN_2011 (1)
C-TS414-2021 (1)
C-ARSCC-2202 (1)
C_THR97_2205 (1)

Free Cram & Latest Exams Dumps

H35-480_V3.0 Actual Questions – Instant Download 60 Questions [Q28-Q52]

leave a comment Cancel reply

Related Certifications

Recent Posts

Archives

Categories