[Q21-Q41] Accurate & Verified 2023 New JN0-682 Answers As Experienced in the Actual Test!

[Q21-Q41] Accurate & Verified 2023 New JN0-682 Answers As Experienced in the Actual Test!

November 6, 2023 latestexam 0 Comments

Rate this post

Accurate & Verified 2023 New JN0-682 Answers As Experienced in the Actual Test!

JN0-682 Certification Sample Questions certification Exam

The JN0-682 exam consists of 65 multiple-choice questions and has a duration of 120 minutes. JN0-682 exam covers a wide range of topics, including data center architecture, virtualization, automation, security, and troubleshooting. In order to pass the exam, candidates must demonstrate their ability to configure and troubleshoot Juniper data center devices and technologies, as well as their understanding of best practices for data center design and implementation.

Juniper JN0-682 Data Center, Professional (JNCIP-DC) certification exam is an excellent option for IT professionals looking to validate their knowledge and skills in data center technologies. Data Center, Professional (JNCIP-DC) certification is highly regarded by employers and can help individuals advance in their careers. With the right preparation and study, candidates can successfully pass the exam and gain the valuable knowledge and skills needed to excel in the field of data center technologies.

NO.21 Exhibit.

Referring to the exhibit, which two statements are correct? (Choose two.)

The local leaf is using the 192.168.100.102 IP address as the local anchor point of the VTEP tunnel.

The remote leaf is using the 192.168.100.102 IP address as the local anchor point of the VTEP tunnel.

The remote leaf is using the 192.168.100.101 IP address as the local anchor point of the VTEP tunnel.

The local leaf is using the 192.168.100.101 IP address as the local anchor point of the VTEP tunnel.

NO.22 You are building a new IP fabric data center underlay network and want to ensure predicted load-balancing
behavior for traffic, traversing the fabric.
What are two approaches you should take to satisfy the requirement in this scenario? (Choose two.)

Ensure that all spine devices are the same switched mode.

Ensure that all uplinks are 40GbE.

Ensure that every leaf node has an uplink spine node

Ensure that every node has a link to every other leaf node

NO.23 You are deploying an EBGP IP fabric. In this scenario, which statement is true?

Each spine should peer with every other spine using physical addresses.

Each spine should peer with each leaf using loopback addresses.

Each spine should peer with every other spine using loopback addresses.

Each spine should peer with each leaf using physical addresses.

NO.24 Exhibit.

You administer an EVPN-VXLAN fabric. You notice that there is no VXLAN traffic forwarding through the network.
Referring to the exhibit, which modification will solve the problem?

set firewall family inet filter allow-BGP term 1 from protocol udp set firewall family inet filter allow-BGP term 1 from destination-port 4789

set interfaces et-0/0/49 unit 0 family vxlan

set interfaces et-0/0/49 unit 0 family vpls

set firewall family inet filter allow-BGP term 1 from protocol tcp set firewall family inet filter allow-BGP term 1 from destination-port 4789

NO.25 What happens when a packet is encapsulated by a VXLAN before being placed in the overlay?

The TTL is decremented by two and placed in the VXLAN header.

The QoS marketing are placed in the VXLAN header.

The VLAN-ID is placed in the VXLAN header.

A VNI that maps to the VLAN-ID placed in the VXLAN header.

NO.26 Which two statements define the use of route targets and route distinguishers in an EVPN? (Choose two.)

Route distinguishers ensure that routes from different client remain unique within the data center
domain

Route targets ensure that routes from different clients remain unique within the data center domain

Route distinguishers identify the VRF into which the route should be placed

Route targets identify the VRF into which the route should be placed

NO.27 The MC-LAG group shown in the exhibit is providing high availability services for the directly connected servers. The backup liveness detection is applied to the ICL-PL link, however, when one of the members rebooted, there was traffic loss for a few seconds.

In this scenario, where should you apply the backup liveness detection?

On the management interfaces

On the ae2 interface

On the ae1 interface

On the ae0 interface

NO.28 Exhibit.

You are troubleshooting a problem with traffic not reaching a remote VTEP Referring to the exhibit, what is the reason for the problem?

A conflict exists with the VLAN-to-VNI mapping.

The local VTEP is misconfigured with the wrong VNI.

No VTEP is configured on peer 192.0.2.20.

The remote VTEP does not have the correct VNI configured.

NO.29 You are deploying an EBGP IP fabric. In this scenario, which statement is true?

Each spine should peer with every other spine using physical addresses.

Each spine should peer with each leaf using loopback addresses.

Each spine should peer with every other spine using loopback addresses.

Each spine should peer with each leaf using physical addresses.

NO.30 Which two statements describes an IP fabric? (Choose two.)

Each leaf should have a connection to each spine.

Open standards allow for vendor interoperability.

Traffic should always follow a single path

xSTP protocols should be used to prevent loops

NO.31 Exhibit.

Referring to the exhibit, which two statements are correct? (Choose two.)

There are two tunnels to the remote endpoint.

The irb. 0 interface is the remote tunnel endpoint interface.

The source tunnel IP address is 192.168.100.11.

There is one tunnel to the remote endpoint.

NO.32 You are deploying an EBGP IP fabric. In this scenario, which statement is true?

Each spine should peer with every other spine using physical addresses.

Each spine should peer with each leaf using loopback addresses.

Each spine should peer with every other spine using loopback addresses.

Each spine should peer with each leaf using physical addresses.

NO.33 Exhibit.

Referring to the exhibit, what effect does EVPN core isolation have?

Leaf 1 will send a pause frame to each connected host.

Leaf 1 will place the interfaces to connected hosts into LACP passive mode.

Leaf 1 will take down all revenue interfaces.

Spine 1 will block all traffic.

NO.34 You are configuring VXLAN. and you must ensure that all switches for the multicast groups advertise their existence and learn about other VTEPs In this scenario. which protocol will accomplish this task?

OSPF

EVPN

PIM

BOP

NO.35 You are asked to enable visibility into your EVPN-VXLAN network traffic by monitoring traffic continuously. Which two statements are correct in this scenario? (Choose two.)

You cannot enable sFlow monitoring on each interface individually.

The sFlow agent is installed by default on your OFX Series switch.

You must enable sFlow monitoring on each interface individually.

The sFlow agent needs to be manually installed on your QFX Series switch.

NO.36 Referring to the exhibit, which two statements are correct? (Choose two.)

The local leaf is using the 192.168.100.102 IP address as the local anchor point of the VTEP tunnel.

The remote leaf is using the 192.168.100.102 IP address as the local anchor point of the VTEP tunnel.

The remote leaf is using the 192.168.100.101 IP address as the local anchor point of the VTEP tunnel.

The local leaf is using the 192.168.100.101 IP address as the local anchor point of the VTEP tunnel.

NO.37 Exhibit.

The configuration shown in the exhibit is intended to set up assisted replication but will not commit.
Which action will create a valid configuration in this situation?

Change the 10.0 address to 192.168.100.1 primary.

Change the replicator inet address to 192.168.100.101.

Delete replicator inet 192.168.100.1.

Change the replicator inet address to 192.168.100. 51.

NO.38 What are two methods used to scale an IBGP IP Fabric? (Choose two.)

Spanning tree

Redundant trunk groups

Route reflection

Confederations

NO.39 What are two types of EVPN routes? (Choose two.)

ES-lmport route target

Ethernet segment

MAC mobility

MAC advertisement

NO.40 You are asked to design a deployment plan for a large number of QFX Series switches using ZTP. The ZTP
deployment plan must ensure all switches are configured with their designated configuration file.
Which DHCP option and subscription combination would be used to accomplish this task?

DHCP option 43 a suboption of 00.

DHCP option 66 a suboption of 01.

DHCP option 66 a suboption of 00.

DHCP option 43 a suboption of 01.

NO.41 You have configured a new MC-LAG connection to a host. After committing the configuration, the MC-LAG link is not functioning properly.

Referring to the exhibit, how would you solve this problem?

Configure a system-id on qfx1 that is different from the system-id on qfx2

Change the mc-ae is on qfx1 to 1

Configure status-control on qfx2 to active

Change the chassis on qfx1 to 1

Loading …

Certification Topics of JN0-682 Exam PDF Recently Updated Questions: https://www.latestcram.com/JN0-682-exam-cram-questions.html

Related Certifications

C_BRSOM_2020 (1)
C_FIORD_2404 (1)
C_TS450_2021 (1)
C-BW4H-2404 (1)
C_S4CS_2302 (1)
C-WZADM-01 (2)
C-TSCM62-67 (1)
C-THR96-2305 (1)
C-TS4C-2023 (1)
C_THR86_2205 (1)

Free Cram & Latest Exams Dumps

[Q21-Q41] Accurate & Verified 2023 New JN0-682 Answers As Experienced in the Actual Test!

leave a comment Cancel reply

Related Certifications

Recent Posts

Archives

Categories