Free Cram & Latest Exams Dumps

Q87. What test instrument(s) are used for insertion loss testing.

Q88. Which multimode insertion loss test reference method is required in industry standards?

Q89. UTP cable is designed to be pulled with no more than _____ pounds tension.

Q90. Rays of light transmitted in multimode fiber are called __________.

Q91. Before UTP cabling became widely used and the industry standard, most Ethernet Networks were connected over _______ cable.

Q92. Most _________ are designed to allow easy pulling to simplify installation.

Q93. How many methods are included in standards for setting the “0 dB’ reference for loss testing?

Q94. What is the MINIMUM lighting requirement for telecommunications spaces?

Q95. The difference between the termination schemes of T568A and T568B is ______?

Q96. A wireless antenna is also known as a __________.

Q97. Multiple Response: Identify one or more choices that best complete the statement or answer the question.
Multimode transceivers use __________ sources depending on their requirements for coupled power and bandwidth.

Q98. Loss of a fiber or any fiber in a cable is measured in __________.

Q99. 66 punchdown blocks have 4 contacts across a row. Why?

Q100. Multiple Response: Identify one or more choices that best complete the statement or answer the question.
The bandwidth and distance capability of optical fiber means that __________. (choose all that apply)

Q101. The diameter of the core in OM2 and OM3 multimode fiber is how large?

Q102. Which connector was chosen as the standard for the most recent EIA/TIA 568 cabling standard?

Q103. Structured cabling standards call for a maximum length of singlemode fiber optic cable for backbones of
__________.

Q104. One cannot emphasize strongly enough the value of _________.

Q105. Multiple Response: Identify one or more choices that best complete the statement or answer the question.
Which types of dispersion needs to be tested in long singlemode fiber links?

Q106. Structured cabling standards allow for a maximum length of permanently installed (not including patchcords) UTP cable for data of __________.

Q107. Attenuation in copper cable____________.