Free Cram & Latest Exams Dumps

NEW QUESTION 18
Your Windows clients were able to access your CIFS SVM yesterday. Today they are no longer able to access the CIFS SVM on your NetApp cluster. Your IT security team just pushed out a new group policy to enhance security.
In this scenario, which statement is true?

NEW QUESTION 19
In ONTAP 9.5, the event log show command queries and displays entries from which file?

NEW QUESTION 20
A customer mentions that their Windows users cannot access clustered Data ONTAP 8.3.1 CIFS shares. The users see “access denied” on the Windows side.
Host name resolution is working and properly resolves IP to host name and host name to IP and the customer can ping using host name and IP. In this scenario, which statement describes the problem?

NEW QUESTION 21
Which NetApp technology enables a volume to span across one or more aggregates and one or more NetApp nodes?

NEW QUESTION 22
Click the Exhibit button at the right.
A customer reports that a node panicked due to a multidisk failure.
While in take over, the customer reviewed the output of the sysconfig -a command and noticed a discrepancy in the shelf stack as shown in the exhibit.

The customer proceeded to examine the power supplies in the stack of shelves; all were functional.
Which step would you take to solve this problem?

NEW QUESTION 23
Referring to the exhibit.


The exhibit shows an overview of a customer’s network design. The customer is experiencing ping loss. As part of the troubleshooting process, you receive output by using the if grp status command from the node shell.
In this scenario, what is the customer’s problem?

NEW QUESTION 24
You want to set up a FabricPool between an ONTAP cluster and Google Cloud Storage.
In this scenario, which two components are required to accomplish this task? (Choose two.)

NEW QUESTION 25
What is the minimum number of compute nodes required to run the NetApp Deployment Engine for NetApp HCI?

NEW QUESTION 26
Referring to the exhibit.


Your customer’s MetroCluster controllers have generated AutoSupport notifications with a “DISK REDUNDANCY FAILED” message.
Referring to the exhibit, which component is causing the problem?

NEW QUESTION 27
Referring to the exhibit.

A database administrator explains that the backup job scheduled to complete by 7:00 AM is not completing as fast as expected. You log in to theFAS3240 system and execute a few commands and obtain the output shown in the exhibit.
Which system resource would you eliminate as a eliminate as a problem based on the command output?

NEW QUESTION 28
Referring to the exhibit, which two components should be examined? (Choose two.)

NEW QUESTION 29
Referring to the exhibit.

The customer configured an SVM called “NewSVM” for NFS, configured the volume, “vol_nfs”, mounted at “/vol_nfs”, and set up NFSv3 as shown in the exhibit.
However, if they try to mount from the client with IP address 192.168.10.10, they receive a “permission denied” error. In this scenario, which action will solve the error condition?

NEW QUESTION 30
Which NetApp HCI component communicates with activeiq.solidfire.com and the Cloud Data Services portal?

NEW QUESTION 31
Microsoft SQL Server is being hosted from a Microsoft Hyper-V cluster and is mounting a LUN from NetApp storage that contains its working databases.

In this scenario, which product would be used to ensure that consistent Snapshot copies of the database are obtained?

NEW QUESTION 32
Which NetApp technology enables you to perform block-based replication from NetApp Element software to Cloud Volumes ONTAP?

NEW QUESTION 33
You receive an AutoSupport notification because of the error shown below. “HA GROUP ERROR: DISK/SHELF COUNT MISMATCH ERROR.”
In this scenario, which two steps would you take to solve the problem? (Choose two.)

NEW QUESTION 34
Which two capabilities does the Flash Cache feature have that the Flash Pool feature does not have? (Choose two.)

NEW QUESTION 35
Referring to the exhibit.


Which two actions would you perform to address the system alternate-control-path (ACP) connectivity issue shown in the exhibit? (Choose two.)

NEW QUESTION 36
When you replace a motherboard, which step will completely test the newly installed component?

NEW QUESTION 37
Several clients are accessing an ONTAP SnapMirror DP destination volume. Some clients frequently access the newest SnapMirror volume data. Accessing this data is much slower when compared to clients that directly access data on the source. You use the wafl scan status command against the destination.
What is a symptom of the problem in this scenario?

NEW QUESTION 38
Which three conditions would prevent a normal giveback operation? (Choose three.)

NEW QUESTION 39
Exhibit:

Your customer has recently migrated from their FAS3140 system running Data ONTAP 7.3.7 to a FAS2552 system running Data ONTAP 8.2.3 7-Mode through the head upgrade process.
They are no longer receiving the weekly AutoSupport notifications and want to know why. The exhibit shows the AutoSupport options from the nodes that have the same settings.
In this scenario, which solution is correct?

NEW QUESTION 40
Referring to the exhibit.

A customer contacts you and asks for assistance in determining which ports can be used for a new broadcast domain on a clustered Data ONTAP 8.3.2 system.
The system is serving LUNs using the FC protocol and is in production.
However, for Ethernet traffic, it is not yet in production. The customer provides you the output of the network port show command.
Referring to the exhibit, which ports will be eligible to create a new broadcast domain without impacting production storage virtual machines (SVMs) serving FC LUNs?

NEW QUESTION 41
Source Path Destination Path Relationship ID Relationship Type
msgld: msragld: 78e304e0-9781-1234-abcd-00a098d771bd XDP
msxpgld: msraxpgld: 3ca42ab4-9782-1234-abcd-00a098d771bd XDP
na_docavgld: ndradocavgld: a4b233b2-9783-1234-abcd-00a098d771bd XDP
na_dr: ndradr: c97d36a0-6d7c-11e8-83fb-00a098d771bd XDP
na_gld: ndragld: 9e7e034d-9782-1234-abcd-00a098d771bd XDP
na_mpgld: ndrampgld: 16e52e0d-9783-1234-abcd-00a098d771bd XDP
na_opengld: ndraopengld: dabb1813-9780-1234-abcd-00a098d771bd XDP
na_poc: ndrapoc: c1d632d7-977b-1234-abcd-00a098d771bd XDP
na_pubgld: ndrapubgld: 1a3f866c-9780-1234-abcd-00a098d771bd XDP
Referring to the output, which type of SnapMirror destination relationship is being used?

NEW QUESTION 42
You have an ONTAP 9.3 cluster and create a new SnapMirror relationship with a SnapMirror type of DP. You initialization the SnapMirror relationship and verify that incremental updates are operating as expected.
However, you notice that the SnapMirror type is XDP instead of the specified DP.
In this scenario, which statement is correct?